BERETTA STAMPEDE JOHN WAYNE SAA GRIPS ~ MAGNA-TUSK™ AGED IVORY

Arizona Custom Grips

BERETTA STAMPEDE

(Beretta Model 1873 SINGLE ACTION
ARMY STYLE REVOLVERS)

~ Exclusive ~

  MAGNA-TUSK™

john wayne fingergroove

Aged ivory GRIPS

Hand cut in the
famous John Wayne Fingergroove style featured in many of his most famous
Westerns, such as True Grit, The War Wagon, The Cowboys, and Rooster Cogburn.  These grips are made out of our exclusive
Magna-Tusk™ Ivory, then aged to perfection -- the highest quality grips of
their type ever available.   An exclusive
of Arizona Custom Grips.  

~~~~~~

two-PIECE
(with SCREWHOLE) STYLE

One-Piece vs. Two-Piece
Grips: Many people prefer the clean lines of a grip without a
screwhole (One-Piece), while others prefer the look and convenience of a
Two-Piece grip (with a screw), which is easier to remove for cleaning or
maintenance.  Both styles were originally
made by Colt in the 1800’s, and both are historically correct.  Whichever style you choose really depends on
the look you are after.  We manufacture
both styles.

Note: ANY of
our grips, whether ONE-PIECE OR TWO PIECE style, will interchange and
work on either style of grip frame. 

THIS AUCTION IS FOR THE TWO-PIECE (SCREWHOLE) STYLE.

We include, free of charge, a conversion kit
which allows these two-piece grips to mount onto a one-piece style grip frame
(without a grip pin).  Our conversion kit replaces the need for a
grip pin and is actually a stronger design, and locks the grips up tight
against the frame, allowing no movement. 
This
gives you the advantage of the ease of maintenance of two-piece grips, while
preserving the integrity of your revolver in original factory condition. 

Grip screw, conversion kit, and
full instructions with illustrations are included with each set of grips. 

Whichever style you choose, you
are guaranteed to get the best quality grips on the market, made to last a
lifetime, for your shooting pleasure and enjoyment.

10292000

What these will fit:

This auction is for a
set of Genuine Magna-Tusk™ grips for the BERETTA STAMPEDE (Model
1873 Single Action Army SAA revolvers).

What these will NOT fit: 

Please note that these grips are made to fit ONLY the BERETTA STAMPEDE Single Action revolvers, with the typical SAA
“plowhandle” shaped gripframe, and will NOT fit any revolvers from other
makers (such as Uberti, Pietta, Armi San Marco, Colt, Ruger, etc.).  These grips will also NOT fit the
Bisley, the Birdshead, the Thunderer, Thunderball, or the Lightning style
revolvers, nor any of the Remington style revolvers such as the 1858, 1875, or
1890, from ANY maker, which use a completely different shaped gripframe.  Please drop us an email if you have any
questions, we are always happy to help.

 A
note on the Italian-produced Revolvers:

The
Italian firms, located in Northern Italy, have been making SAA style revolvers
now for well over a half century, and have made numerous makes and models and
grip frame profiles with varying configurations over the years.  We have an in-depth knowledge of the
differing grip configurations, have a large library of gripframe variations
from the various makers both old and new, and have vast experience making grips
for Uberti, Pietta, as well as the other Italian gunmaking firms.   Our experienced makers go to great lengths
to ensure an exacting fit, including utilizing modern precision CNC production
techniques, as well as incorporating old-time hand tuning and hand checking the
fit of every grip on our reference frames prior to leaving our factory.  We have a long list of many satisfied
customers in the shooting industry who have purchased grips to use in a wide
variety of applications, and we can safely and confidently guarantee proper fit
and finish to your complete satisfaction.

For an additional
charge, custom fitting is an option.  Please contact us for further
details if you are interested in custom fitting.

10312000

Arizona Custom Grips

About our exclusive Magna-Tusk™ “Hi-Grade”
Ivory and Stag Grips:

Magna-Tusk™ Ivory and Stag grips, an
exclusive of Arizona Custom Grips, are manufactured out of our
super high-grade, ultra-high density material developed exclusively for our
premium grip production.  Vastly superior to standard bonded ivory or
stag found on factory and other aftermarket grips, Magna-Tusk™ is capable of
withstanding the heaviest recoil and impact, and is the toughest alternative grip
material available today, while still retaining the pristine look of real ivory
or stag.  It is completely rock-solid, stable, and water, chemical,
and oil resistant.  It is flame and heat resistant, and is entirely
void-free, with over 10x the strength, durability, and impact resistance of
alternative materials.  Unlike with real ivory or stag, there is no
routine care and maintenance involved, with no danger of it drying out and
cracking if not maintained properly or if left in the heat.  It is
filled with premium natural and synthetic compounds to produce outstanding
aesthetic properties and mechanical performance.  When aged with our
exclusive aging process, it takes on the equivalent of a 100-year-old patina,
with subtle grain details which many experts cannot tell apart from the real
thing.  In addition, the material has a fine grain structure, which
holds intricate detail for carvings, artistic relief work, etc., found on many
historic grips. 

About Our Aging Process:

Unlike
the lightweight artificial yellow plastic materials sometimes offered for sale,
Magna-Tusk aged grips start out as a solid block of white virgin Magna-Tusk
Ivory.  Grip blanks are then milled from
this premium material, incorporating both CNC techniques for blanking and
finishing techniques similar to those used in manufacturing the originals.  They are then carefully aged with our
exclusive aging process, incorporating concentrated UV light (the essential
aging property in natural sunlight). 

Our process produces an authentic appearance and genuine patina
which extends into the surface, just like real ivory or stag.  Not only does this
give it the appearance of authenticity and depth, but this surface will not
chip, crack, or peel like a superficially applied coating.  Accept no substitutes.  With Magna-Tusk aged grips, most experts cannot tell them apart
from a decades-old or even a centuries-old original.  While the quality difference is somewhat
noticeable in the photos, the difference is even more apparent when seen and
handled in person.  Many of our repeat
sales are made by the very customers we sell to, who take their custom-stocked
revolvers to the range or club, where the quality difference is immediately
seen and appreciated by fellow shooters.

Magna-Tusk grips have all the authenticity of the originals, with
several improvements over original materials including increased durability,
and are made to last a lifetime.  They
feature subtle but authentic color mottling, grain variegation, and other
authentic minute details found on original old Ivory and aged Stag, as seen on
many of the revolvers which belonged to gunfighters and lawmen of the Old
West.  Dense, heavy, and solid, Magna-Tusk grips are in a class all their
own. With our exclusive aging process, these grips
are outstanding right out of the box, and will continue to improve over
time.  The more these grips are handled
and used, the better they look!

030120

Grip screw included
with all grips. 

The photo used is a stock photo (a sample
pair).  Yours will appear similar to these. 

Customer
satisfaction is important to us – we guarantee your complete satisfaction with
every purchase!!