ARMI SAN MARCO SAA GRIPS ~ MAGNA-TUSK™ 2P WHITE IVORY, TWO-PIECE

Arizona Custom
Grips

ARMI SAN MARCO

Model 1873 SINGLE
ACTION ARMY STYLE REVOLVERS

~ Exclusive ~

  MAGNA-TUSK™

white ivory GRIPS

Milled out of a solid block of Magna-Tusk, denser and heavier than
regular Ivory or Stag.  See below for details.

~~~~~

two-PIECE (with SCREWHOLE) STYLE

THIS
AUCTION IS FOR OUR TWO-PIECE (SCREWHOLE) STYLE GRIPS.  SEE BELOW.

********

Note:
Two-Piece grips, in addition to a visible screw, have a grip pin installed in the
frame to help hold them in place.  One-Piece
grips (grips with no visible screw) have a spacer installed between the panels,
with no grip pin.  BOTH styles of our
grips will interchange and work on either style of grip frame.  See below.

One-Piece style grips (i.e., grips
which do not have a visible screwhole in the grips) incorporate a single user
installed spacer between the grip panels, as seen on many of the early
Colts.  This results in a rock-tight fit,
without the use of a screw.  Preferred by
many collectors for their clean lines and traditional look, One-Piece style
grips are removed by removing the three backstrap screws, and pulling the grip
and strap backwards.  Reinstallation is
in reverse order.  Our One-Piece grips
will work on either style gripframe (either One-Piece or Two-Piece style grip frames).  Fully illustrated instructions included for
easy, quick installation.

Alternatively, our Two-Piece style
grips (i.e., grips with a visible screw) offer the superior convenience of
quick grip removal.  Unlike with
One-Piece grips, the backstrap need not be removed to remove the grips for
cleaning and maintenance of the revolver. 
Our Two-Piece grips include a free Conversion kit (allowing their use on One-Piece style frames) which
replaces the need for a grip pin and is actually a stronger design, and allows
the grips to lock up tight, allowing no movement.  This
requires no modification to your revolver and gives you the advantage of the
ease of maintenance of Two-Piece grips, while preserving the integrity of your
revolver in original factory condition. Two-Piece style grips were
also used on many of the early Colts, and are a traditional and iconic
historical design, offering a distinctive look and convenience preferred by
many collectors.

Fully illustrated, detailed instructions
are included with each set of grips.  22010345

~~~~~

What these will fit:

This auction is for a
set of Genuine Magna-Tusk™ grips for the ARMI SAN MARCO Model
1873 Single Action Army SAA revolvers.

Note:  Please note that these grips are made to
fit ONLY the ARMI SAN MARCO revolvers, with the standard sized “plowhandle” gripframe. 
These grips are around 3-1/16" to 3-1/8” tall, depending on how you hold
your tape, ruler, or caliper.  They will NOT fit anything with a Bisley, Birdshead, Thunderer or
Lightning style gripframe, which use a completely different shaped grip from
the ones shown in the photos.  Also please note that these will NOT fit other makes and models
of revolvers from other manufacturers.    

If you have a different
make of revolver and cannot find what you need, please contact us for help. 

For an additional
charge, custom fitting is another option. 
Please contact us for further details. 10312000

A note on the Italian-produced
Revolvers:

The Italian firms, located in Northern
Italy, have been making SAA style revolvers now for well over a half century,
and have made numerous makes and models and grip frame profiles with varying
configurations over the years.  We have
an in-depth knowledge of the differing grip configurations, have a large
library of gripframe variations from the various makers both old and new, and
have vast experience making grips for Uberti, Pietta, as well as the other
Italian gunmaking firms.   Our
experienced makers go to great lengths to ensure an exacting fit, including
utilizing modern precision CNC production techniques, as well as incorporating
old-time hand tuning and hand checking the fit of every grip on our reference
frames prior to leaving our factory.  We
have a long list of many satisfied customers in the shooting industry who have
purchased grips to use in a wide variety of applications, and we can safely and
confidently guarantee proper fit and finish to your complete satisfaction.

10312000

Arizona Custom Grips

About Magna-Tusk™ Ivory
and Stag Grips:

 Magna-Tusk™ Ivory and Stag grips, a
product of Arizona Custom Grips, are manufactured out of our
high-grade, high density ivory material designed from the beginning as a premium,
high-strength grip material.  Vastly
superior to standard bonded ivory or stag found on most factory and other
aftermarket grips, Magna-Tusk™ is capable of withstanding the heaviest recoil
and impact, and is the toughest alternative grip material available today,
while still retaining the pristine look of real ivory or stag.  It is
rock-solid, stable, and water, chemical, and oil resistant.  It is
flame and heat resistant, and is entirely void-free, with over 10x the
strength, durability, and impact resistance of alternative materials.  Unlike
with real ivory or stag, there is no routine care and maintenance involved,
with no danger of it drying out and cracking if not maintained properly or if
left in the heat.  It is filled with premium natural compounds to
produce outstanding aesthetic properties and mechanical
performance.  When aged with our natural aging process, it takes on
the equivalent of a 100-year-old patina, with subtle grain details which many
experts cannot tell apart from the real thing.  In addition, the material
has a fine grain structure, which holds intricate detail for carvings, artistic
relief work, etc., found on many historic grips.  

08292000

The photo used is a stock photo (a sample
pair).  Yours will appear similar to these. 

Customer
satisfaction is important to us – we guarantee your complete satisfaction with
every purchase!!