Skip to product information
1 of 2

ARMI SAN MARCO SAA GRIPS ~ MAGNA-TUSK™ WHITE STAG

ARMI SAN MARCO SAA GRIPS ~ MAGNA-TUSK™ WHITE STAG

Regular price $94.95 USD
Regular price Sale price $94.95 USD
Sale Sold out

Arizona Custom
Grips

ARMI SAN MARCO

Model 1873 SINGLE
ACTION ARMY STYLE REVOLVERS

~ Exclusive ~

  MAGNA-TUSK

WHITE STAG GRIPS

Simulated Stag
Grips milled out of a solid block of Magna-Tusk, denser and heavier than
regular Ivory or Stag.  See below for details.

~~~~~~~

two-PIECE (with SCREWHOLE) STYLE

One-Piece
vs. Two-Piece Grips
: Many people prefer the clean lines of
a grip without a screwhole (One-Piece), while others prefer the look and
convenience of a Two-Piece grip (with a screw), which is easier to remove for
cleaning or maintenance.  Both styles
were originally made by Colt in the 1800’s, and both are historically
correct.  Whichever style you choose
really depends on the look you are after. 
We manufacture both styles.

Note:
ANY of our grips, whether ONE-PIECE OR TWO PIECE style, will interchange
and work on either style of grip frame. 

THIS AUCTION IS FOR THE TWO-PIECE (SCREWHOLE) STYLE.

We include, free of charge, a conversion kit
which allows these two-piece grips to mount onto a one-piece style grip frame
(without a grip pin).  Our conversion kit replaces the need for a
grip pin and is actually a stronger design, and locks the grips up tight
against the frame, allowing no movement. 
This
gives you the advantage of the ease of maintenance of two-piece grips, while
preserving the integrity of your revolver in original factory condition. 

Grip screw, conversion kit, and
full instructions with illustrations are included with each set of grips. 

Whichever style you choose, you
are guaranteed to get the best quality grips on the market, made to last a
lifetime, for your shooting pleasure and enjoyment.

10292000

 

What these will fit:

This auction is for a
set of Genuine Magna-Tusk ™ Aged Simulated Stag grips for the ARMI SAN
MARCO
 Model 1873 Single Action Army SAA revolvers.

 

What these will NOT fit:  Please note that these grips are made to
fit only the ARMI SAN MARCO revolvers, with the typical “plowhandle” shaped
gripframe.  The grips are around 3-1/16" to 3-1/8” tall, depending on
how you hold your tape, ruler, or caliper.  They will NOT fit
anything with a Bisley, Birdshead, Thunderer or Lightning style gripframe,
which use a completely different shaped gripframe from the ones shown in the
photos.  Additionally, they will NOT fit other makes and models of
revolvers.    

If you have a different
make of revolver, please contact us and let us know what you have, as we have
grips available for many other makes and models and will be happy to direct you
to the correct listing.

For an additional
charge, custom fitting is an option.  Please contact us for further
details if you are interested in custom fitting.

10312000

A note on the Italian-produced
Revolvers:

The Italian firms, located in Northern
Italy, have been making SAA style revolvers now for well over a half century,
and have made numerous makes and models and grip frame profiles with varying
configurations over the years.  We have
an in-depth knowledge of the differing grip configurations, have a large
library of gripframe variations from the various makers both old and new, and
have vast experience making grips for Uberti, Pietta, as well as the other
Italian gunmaking firms.   Our
experienced makers go to great lengths to ensure an exacting fit, including
utilizing modern precision CNC production techniques, as well as incorporating
old-time hand tuning and hand checking the fit of every grip on our reference
frames prior to leaving our factory.  We
have a long list of many satisfied customers in the shooting industry who have
purchased grips to use in a wide variety of applications, and we can safely and
confidently guarantee proper fit and finish to your complete satisfaction.

For an additional
charge, custom fitting is an option.  Please contact us for further
details if you are interested in custom fitting.





10312000



Arizona Custom Grips



About Magna-Tusk™ Ivory
and Stag Grips:



 Magna-Tusk™ Ivory and Stag grips, a
product of Arizona Custom Grips, are manufactured out of our
high-grade, high density ivory material designed exclusively as a premium,
high-strength grip material.  Vastly
superior to standard bonded ivory or stag found on most factory and other
aftermarket grips, Magna-Tusk™ is capable of withstanding the heaviest recoil
and impact, and is the toughest alternative grip material available today,
while still retaining the pristine look of real ivory or stag.  It is
rock-solid, stable, and water, chemical, and oil resistant.  It is
flame and heat resistant, and is entirely void-free, with over 10x the
strength, durability, and impact resistance of alternative
materials.  Unlike with real ivory or stag, there is no routine care
and maintenance involved, with no danger of it drying out and cracking if not
maintained properly or if left in the heat.  It is filled with
premium natural compounds to produce outstanding aesthetic properties and
mechanical performance.  When aged with our natural aging process, it
takes on the equivalent of a 100-year-old patina, with subtle grain details
which many experts cannot tell apart from the real thing.  In
addition, the material has a fine grain structure, which holds intricate detail
for carvings, artistic relief work, etc., found on many historic grips.  



08292000



Please note that the photo used is a stock photo (a
sample pair).  Yours will appear similar to these. 



Customer
satisfaction is important to us</


Listed with ExportYourStore.com
View full details