Skip to product information
1 of 2

COLT SAA 3rd Generation Single Action Army, Third Gen ~ 1P AGED IVORY GRIPS

COLT SAA 3rd Generation Single Action Army, Third Gen ~ 1P AGED IVORY GRIPS

Regular price $119.95 USD
Regular price Sale price $119.95 USD
Sale Sold out

Arizona Custom Grips

Colt SAA

3rd Generation

~ Exclusive ~

  MAGNA-TUSK

Aged ivory GRIPS

Milled out of a solid block of
Magna-Tusk, denser and heavier than regular Ivory or Stag.  See below for details.

~~~~~

oNE-PIECE
(nO SCREWHOLE) STYLE

THIS AUCTION IS FOR OUR
ONE-PIECE (NO SCREWHOLE) STYLE GRIPS
SEE BELOW.

********

Note: Two-Piece grips,
in addition to a visible screw, have a grip pin installed in the frame to help hold
them in place.  One-Piece grips (grips
with no visible screw) use a spacer between the panels, with no screw and no grip
pin.  BOTH styles of our grips will
interchange and work on either style of grip frame.  See below.

One-Piece style grips (i.e., grips
which do not have a visible screwhole in the grips) incorporate a user
installed spacer between the grip panels, as seen on many of the early
Colts.  This results in a rock-tight fit,
without the need of a screw.  Preferred
by many collectors for their clean lines and traditional look, One-Piece style
grips are removed by removing the three backstrap screws, and pulling the grip
and backstrap backwards.  Reinstallation
is in reverse order.  Our One-Piece style
grips will work on either style gripframe (either One-Piece or Two-Piece style grip
frames).  Fully illustrated instructions
included for quick and easy installation.

Alternatively, our Two-Piece style
grips (i.e., grips with a visible screw) offer the superior convenience of
quick grip removal.  Unlike with
One-Piece grips, the backstrap need not be removed to remove the grips for
cleaning and maintenance of the revolver. 
Our Two-Piece grips include a free C
onversion kit (allowing their use on One-Piece style frames) which
replaces the need for a grip pin and is actually a stronger design, and allows
the grips to lock up tight, allowing no movement. 
This
requires no modification to your revolver and gives you the advantage of the
ease of maintenance of Two-Piece grips, while preserving the integrity of your
revolver in original factory condition. Two-Piece style grips were
also used on many of the early Colts, and are a traditional and iconic
historical design, offering a distinctive look and convenience preferred by
many collectors.

Fully illustrated, detailed instructions
are included with each set of grips. 
22010345

~~~~~

WHAT THESE WILL FIT (Please read this through in its
entirety)
:

 

Colt SAA 3rd Gen.

Brand New, unused grips for the 3rd
Generation Colt Single Action Army revolvers.  

Please note that these grips will NOT properly fit the 1st or
2nd Generation Colt SAA models. 

Also, these will NOT fit any revolvers of any different maker, including the
Uberti, Pietta, or any other Italian or non-Italian clones.  If you have
one of these, please see our store categories for the proper grips, or drop us
an email and we will be happy to help.





10292000



 



Arizona Custom Grips



About Magna-Tusk™ Ivory
and Stag Grips:



 Magna-Tusk™ Ivory and Stag grips, a
product of Arizona Custom Grips, are manufactured out of our
high-grade, high density ivory material designed exclusively as a premium,
high-strength grip material.  Vastly
superior to standard bonded ivory or stag found on most factory and other
aftermarket grips, Magna-Tusk™ is capable of withstanding the heaviest recoil
and impact, and is the toughest alternative grip material available today,
while still retaining the pristine look of real ivory or stag.  It is
rock-solid, stable, and water, chemical, and oil resistant.  It is
flame and heat resistant, and is entirely void-free, with over 10x the
strength, durability, and impact resistance of alternative
materials.  Unlike with real ivory or stag, there is no routine care
and maintenance involved, with no danger of it drying out and cracking if not
maintained properly or if left in the heat.  It is filled with
premium natural compounds to produce outstanding aesthetic properties and
mechanical performance.  When aged with our natural aging process, it
takes on the equivalent of a 100-year-old patina, with subtle grain details
which many experts cannot tell apart from the real thing.  In
addition, the material has a fine grain structure, which holds intricate detail
for carvings, artistic relief work, etc., found on many historic grips.  



08292000



About Our Aging Process:



We
go to great efforts to ensure that our Aged Ivory or Stag not only looks similar to, but in fact looks identical to the real thing.  Our Magna-Tusk blanks will produce an aged
Ivory grip unlike any other material made today. 
Our aged grips feature an
authentic aged patina, just like the originals, with a process incorporating
concentrated U.V. light (the essential aging property in natural sunlight), along
with a developer/control agent that is put on the grips to carefully control
U.V. absorption, in a sealed, high-oxygen environment to accelerate the natural
aging process. 



Through
this aging process, these grips become beautifully mottled, variegated, and weathered
just like old, antique Ivory, and
incorporate other authentic details found on original old Ivory as seen on many
of the revolvers which belonged to gunfighters and lawmen of the Old West.  As with real aged Ivory, Magna-Tusk develops
a variegated patina due to its authentic grain structure, and natural aging
produces an authentic appearance and genuine patina which extends into and
below the surface. 
Not only does this give it the appearance of
authenticity and depth, but this surface will not chip, crack, or peel like a
superficially applied coating. 
With Magna-Tusk aged
grips, most experts cannot tell them apart from a decades-old or even a
centuries-old original.  While the
quality difference is somewhat noticeable in the photos, the difference is even
more apparent when seen and handled in person. 
Many of our repeat sales are made by the very customers we sell to, who
take their grips to the range, where our grips are immediately seen and noticed
by others.  If you are interested in
ordering grips for a Brace of pistols, please order both sets together, and we
will ensure a better matchup when selecting pairs. 



Dense, heavy, and solid, Magna-Tusk grips are in a class all their
own.
With our exclusive aging process, these grips
are outstanding right out of the box, and will continue to improve over
time.  The more these grips are handled
and used, the better they look!



08292000



The photo used is a stock photo (a sample
pair).  Yours will appear similar to these. 



Customer
satisfaction is important to us – we guarantee we will do our best to ensure
your complete satisfaction!!



Listed with ExportYourStore.com
View full details