COLT SAA 3rd GENERATION SINGLE ACTION ARMY, THIRD GEN GRIPS ~ 2P WHITE SCROLL MT

Arizona Custom Grips

Colt SAA

3rd Generation

~ Exclusive ~

  MAGNA-TUSK™

white ivory

scroll engraved GRIPS

Milled out of a solid block of
Magna-Tusk, denser and heavier than regular Ivory or Stag.  See below for details.

~~~~~

two-PIECE
(with SCREWHOLE) STYLE

THIS AUCTION IS FOR OUR
TWO-PIECE (SCREWHOLE) STYLE GRIPS.  SEE BELOW.

********

ONE-PIECE VS. TWO-PIECE STYLE GRIPS:

Note: Two-Piece style
grips incorporate a visible screw and screwhole, allowing easy and quick
removal for cleaning or maintenance of your revolver.  One-Piece style grips do not use a screw but
instead use an internal spacer.  We sell
both types.  Both styles are traditional
and historical designs and both were originally used on early Colts, so it is a
matter of personal preference.  Both
styles of our grips will interchange and work on either style of grip frame, no
matter how your revolver is currently set up.  See below.

One-Piece style grips (i.e., grips
which do not have a visible screwhole in the grips) incorporate a user
installed spacer (included with the grips) between the grip panels, as seen on
many of the early Colts.  The spacer
supplied with your grips is sent unmounted to ensure optimum fit with your
revolver, with simple, quick installation which takes about one minute or so
per panel.  Fully illustrated
instructions are included.  This results
in a rock-tight fit, without the need of a screw.  Preferred by many collectors for their clean
lines and traditional look. One-Piece style grips are removed by removing the
three backstrap screws, and pulling the grip and backstrap backwards.  Reinstallation is in reverse order. 

Alternatively, our Two-Piece style
grips (i.e., grips with a visible screw and screwhole) offer the superior
convenience of quick grip removal.  Our
grips include a free Conversion Kit, allowing
their use on revolvers that are currently set up for One-Piece style grips that
do not have a grip pin.  The Conversion Kit
replaces the need for a grip pin and is actually a stronger design, and allows
the grips to lock up tight on the frame, allowing no movement.  This
requires no modification to your revolver and gives you the advantage of the
ease of maintenance of Two-Piece grips, while preserving the integrity of your
revolver in original factory condition. Two-Piece style grips were
also used on many of the early Colts, and are a traditional and iconic
historical design, offering a distinctive look and convenience preferred by
many collectors.

Fully illustrated, detailed instructions
are included with each set of grips.  06302300

~~~~~

WHAT THESE WILL FIT (Please read this through in its
entirety):

Colt SAA 3^rd Gen.

Brand New, unused grips for the 3rd
Generation Colt Single Action Army revolvers.  

Please note that these grips will NOT properly fit the 1st or
2nd Generation Colt SAA models. 

Also, these will NOT fit any revolvers of any different maker, including the
Uberti, Pietta, or any other Italian or non-Italian clones.  If you have
one of these, please see our store categories for the proper grips, or drop us
an email and we will be happy to help.

10292000

Arizona Custom Grips

About our exclusive Magna-Tusk™ “Hi-Grade”
Ivory Grips:

 Our Ivory grips, an exclusive of Arizona Custom Grips,
are made out of a premium high-grade, ultra-high density ivory material (Magna-Tusk™), designed from the ground
up as a premium grip material to greatly improve on the inherent fragility and
weakness of the cheaper Bonded Ivory used on just about all factory and regular
aftermarket ivory grips today.  Standard
Bonded Ivory is brittle, and tends to weaken and develop stress fractures over
time with repeated use, firing, and handling. 
Magna-Tusk™ is capable of withstanding the heaviest recoil and impact,
and is the toughest alternative Ivory grip material available today, while
still retaining the pristine look of real ivory.  These grips are not
cast or made out of an inferior, lightweight material, but are heavy and dense,
carefully milled out of a solid block, one at a time.  Magna-Tusk is completely rock-solid, stable,
and water, chemical, and oil resistant.  It is flame and heat resistant,
will not melt like Urethane or plastic, and is entirely void-free, with over
10x the strength, durability, and impact resistance of alternative
materials.  Unlike with real ivory, there is no routine care and
maintenance involved, with no danger of it drying out and cracking if not
maintained properly or if left in the heat.  It is produced with outstanding
aesthetic properties and mechanical performance.  When aged with our
exclusive aging process, it takes on the equivalent of a 100-year-old patina,
with subtle grain details which most experts cannot tell apart from the real
thing.  In addition, the material has a fine grain structure, which
holds intricate detail for carvings, artistic relief work, etc., found on many
historic grips. 

Please note that the photo used is a stock photo (a
sample pair).  Yours will appear similar to these. 

Customer
satisfaction is important to us – we guarantee your complete satisfaction with
every purchase!!

Listed with ExportYourStore.com