EAA BOUNTY HUNTER ~ MAGNA-TUSK™ AGED IVORY GRIPS

Arizona Custom Grips

EAA BOUNTY HUNTER

(1873 SINGLE ACTION ARMY STYLE REVOLVERS

 -- Will fit both smallbore (.22 Cal), and large bore (.357, .44 Mag, .45 Colt, etc.) --

~ Exclusive ~

  MAGNA-TUSK™

Aged ivory GRIPS

Milled out of a solid block of Magna-Tusk, denser and heavier than regular Ivory or Stag.  See below for details.

~~~~~

two-PIECE (with SCREWHOLE) STYLE grips

THIS LISTING IS FOR OUR TWO-PIECE (SCREWHOLE) STYLE GRIPS

********

ONE-PIECE VS. TWO-PIECE STYLE GRIPS EXPLAINED:

Note: One-Piece style grips do not have a visible screw but instead use an internal spacer to mount the grips.  Two-Piece style grips incorporate a visible screw, allowing easy and quick removal for cleaning or maintenance of your revolver.  We manufacture both types.  Both styles of our grips will interchange and work on either style of grip frame, no matter how your revolver is currently set up.  Both styles are traditional and historical designs and both were originally used on early Colts, so whichever style you choose is really a matter of personal preference. 

One-Piece style grips (i.e., grips with no visible screwhole in the grips) incorporate a spacer (included with the grips) which is user mounted to the inside of the grip panels to hold them in place instead of a using a screw.  To ensure optimum fit and best performance, the spacer is sent unmounted since all gripframes vary slightly in inside dimensions.  Installation is simple and generally takes only a few minutes.  Illustrated instructions included with each order.  This results in a rock-tight fit, without the need of a screw.  One-Piece grips are preferred by many collectors for their clean lines and traditional look, and are seen on many early Colts. Once mounted, they are fully removable by removing the three backstrap screws, and will not alter your revolver in any way.  Reinstallation is in reverse order. 

Alternatively, our Two-Piece style grips (i.e., grips with a visible screw) offer the superior convenience of quick grip removal using only the screw (also included with the grips).  Our Two-Piece style grips also include our proprietary Conversion Kit, allowing their use on revolvers that do not have a grip pin in the frame (as is the case with most Italian-made revolvers and others that currently have a one-piece style grip).  The Conversion Kit replaces the need for a grip pin and is actually a stronger design, and allows the grips to lock up tight on the frame, allowing no movement.  This requires no modification to your revolver.  Two-piece grips give you the advantage of easier access to your revolver for cleaning and maintenance, while preserving the integrity of your revolver in original factory condition. Two-Piece style grips were also used on many of the early Colts, and are a traditional and iconic historical design, offering a distinctive look and convenience preferred by many shooters and collectors.

Fully illustrated, easy-to-follow mounting instructions are included with every order. 

[Rev 231228]

~~~~~

A Brief History of the EAA Bounty Hunter: The Bounty Hunter owes its lineage to the well-known Hawes Western Marshall revolvers, made by the J.P. Sauer & Sohn firm in Germany from the late 1960’s, into the 1970’s.  J.P. Sauer later acquired the Swiss gunmaker SIG, changing the company name to Sig Sauer.  At that time, Sauer began focusing on autoloaders and sold its revolver operation and tooling to Herman Weihrauch Waffenfabrik, also of Germany. Weihrauch added a transfer bar safety to the old design and continued production of the revolver as the Bounty Hunter.  The Bounty Hunter is currently imported by European American Arms (EAA), based in Florida.

What these will fit:

This auction is for a set of Genuine Magna-Tusk™ grips for the EAA BOUNTY HUNTER (Model 1873 SAA style revolvers).  Note: These grips will fit both the smallbore .22 Caliber revolvers, and the larger .38/.357, .44 Mag., and .45 Colt etc. bores.  Please note that these grips will fit only the standard sized “plowhandle” style frames (around 3-1/8” tall).

What these will NOT fit: 

Please note that these grips are made to fit ONLY the EAA BOUNTY HUNTER Single Action revolvers, with the standard sized (3-1/8” tall) “plowhandle” style frames.  These will NOT fit the less often seen larger sized Bounty Hunter frames (roughly around 3-1/2” or so tall).  Nor will they fit any revolvers from other makers (such as Uberti, Pietta, Armi San Marco, Colt, Ruger, etc.). 

Please drop us an email if you have any questions, we are always happy to help.

For an additional charge, custom fitting is an option.  Please contact us for further details if you are interested in custom fitting.

25122913

Arizona Custom Grips

About Magna-Tusk™ Ivory and Stag Grips:

 Magna-Tusk™ Ivory and Stag grips, a product of Arizona Custom Grips, are manufactured out of our high-grade, high density ivory material designed exclusively as a premium, high-strength grip material.  Vastly superior to standard bonded ivory or stag found on most factory and other aftermarket grips, Magna-Tusk™ is capable of withstanding the heaviest recoil and impact, and is the toughest alternative grip material available today, while still retaining the pristine look of real ivory or stag.  It is rock-solid, stable, and water, chemical, and oil resistant.  It is flame and heat resistant, and is entirely void-free, with over 10x the strength, durability, and impact resistance of alternative materials.  Unlike with real ivory or stag, there is no routine care and maintenance involved, with no danger of it drying out and cracking if not maintained properly or if left in the heat.  It is filled with premium natural compounds to produce outstanding aesthetic properties and mechanical performance.  When aged with our natural aging process, it takes on the equivalent of a 100-year-old patina, with subtle grain details which many experts cannot tell apart from the real thing.  In addition, the material has a fine grain structure, which holds intricate detail for carvings, artistic relief work, etc., found on many historic grips.  

08292000

About Our Aging Process:

We go to great efforts to ensure that our Aged Ivory or Stag not only looks similar to, but in fact looks identical to the real thing.  Our Magna-Tusk blanks will produce an aged Ivory grip unlike any other material made today.  Our aged grips feature an authentic aged patina, just like the originals, with a process incorporating concentrated U.V. light (the essential aging property in natural sunlight), along with a developer/control agent that is put on the grips to carefully control U.V. absorption, in a sealed, high-oxygen environment to accelerate the natural aging process. 

Through this aging process, these grips become beautifully mottled, variegated, and weathered just like old, antique Ivory, and incorporate other authentic details found on original old Ivory as seen on many of the revolvers which belonged to gunfighters and lawmen of the Old West.  As with real aged Ivory, Magna-Tusk develops a variegated patina due to its authentic grain structure, and natural aging produces an authentic appearance and genuine patina which extends into and below the surface.  Not only does this give it the appearance of authenticity and depth, but this surface will not chip, crack, or peel like a superficially applied coating.  With Magna-Tusk aged grips, most experts cannot tell them apart from a decades-old or even a centuries-old original.  While the quality difference is somewhat noticeable in the photos, the difference is even more apparent when seen and handled in person.  Many of our repeat sales are made by the very customers we sell to, who take their grips to the range, where our grips are immediately seen and noticed by others.  If you are interested in ordering grips for a Brace of pistols, please order both sets together, and we will ensure a better matchup when selecting pairs. 

Dense, heavy, and solid, Magna-Tusk grips are in a class all their own. With our exclusive aging process, these grips are outstanding right out of the box, and will continue to improve over time.  The more these grips are handled and used, the better they look!

08292000

Please note that the photo used is a stock photo (a sample pair).  Yours will appear similar to these. 

Customer satisfaction is important to us – full money back, less shipping, if not completely satisfied!!