EAA BOUNTY HUNTER MAGNA-TUSK™ GRIPS ~ 2P WHITE IVORY SCROLL ENGRAVED

Arizona Custom Grips

EAA BOUNTY HUNTER

(1873 SINGLE ACTION ARMY STYLE REVOLVERS)

~ Exclusive ~

  MAGNA-TUSK™

WHITE IVORY

SCROLL ENGRAVED GRIPS

Milled out of a solid block of
Magna-Tusk, denser and heavier than regular Ivory or Stag.  See below for details.

~~~~~

two-PIECE
(with SCREWHOLE) STYLE

THIS AUCTION IS FOR OUR
TWO-PIECE (SCREWHOLE) STYLE GRIPS.  SEE BELOW.

********

ONE-PIECE VS. TWO-PIECE STYLE GRIPS:

Note: Two-Piece style
grips incorporate a visible screw and screwhole, allowing easy and quick
removal for cleaning or maintenance of your revolver.  One-Piece style grips do not use a screw but
instead use an internal spacer.  We sell
both types.  Both styles are traditional
and historical designs and both were originally used on early Colts, so it is a
matter of personal preference.  Both
styles of our grips will interchange and work on either style of grip frame, no
matter how your revolver is currently set up.  See below.

One-Piece style grips (i.e., grips
which do not have a visible screwhole in the grips) incorporate a user
installed spacer (included with the grips) between the grip panels, as seen on
many of the early Colts.  The spacer
supplied with your grips is sent unmounted to ensure optimum fit with your
revolver, with simple, quick installation which takes about one minute or so
per panel.  Fully illustrated
instructions are included.  This results
in a rock-tight fit, without the need of a screw.  Preferred by many collectors for their clean
lines and traditional look. One-Piece style grips are removed by removing the
three backstrap screws, and pulling the grip and backstrap backwards.  Reinstallation is in reverse order. 

Alternatively, our Two-Piece style
grips (i.e., grips with a visible screw and screwhole) offer the superior
convenience of quick grip removal.  Our
grips include a free Conversion Kit, allowing
their use on revolvers that are currently set up for One-Piece style grips that
do not have a grip pin.  The Conversion Kit
replaces the need for a grip pin and is actually a stronger design, and allows
the grips to lock up tight on the frame, allowing no movement.  This
requires no modification to your revolver and gives you the advantage of the
ease of maintenance of Two-Piece grips, while preserving the integrity of your
revolver in original factory condition. Two-Piece style grips were
also used on many of the early Colts, and are a traditional and iconic
historical design, offering a distinctive look and convenience preferred by
many collectors.

Fully illustrated, detailed instructions
are included with each set of grips.  06302300

~~~~~

What these will fit:

This auction is for a
set of Genuine Magna-Tusk™ grips for the EAA BOUNTY HUNTER (Model
1873 SAA style revolvers). 

The EAA Bounty Hunter, made by Weihrauch of Germany and imported by
European American Arms in Florida, incorporates a transfer bar safety and a
slightly larger frame than the Colt SAA, capable of handling the .44 Magnum. 

A Brief History of the
EAA Bounty Hunter: The Bounty Hunter
owes its lineage to the well known Hawes Western
Marshall revolvers, made by the J.P. Sauer & Sohn firm in Germany from
the late 1960’s and into the 1970’s. 
J.P. Sauer later acquired the Swiss gunmaker SIG, changing the company
name to Sig Sauer.  At that time, Sauer began
focusing on autoloaders and sold its revolver operation and tooling to Herman
Weihrauch Waffenfabrik, also of Germany. Weihrauch added a transfer bar safety and
continued production of the revolver as the Bounty
Hunter.

What these will NOT fit: 

Please note that these grips are made to
fit ONLY the EAA BOUNTY HUNTER Single Action revolvers.  These will NOT fit any revolvers from other
makers (such as Uberti, Pietta, Armi San Marco, Colt, Ruger, etc.).  Please drop us an email if you have any
questions, we are always happy to help.

 For an additional charge, custom fitting is an
option.  Please contact us for further details if you are interested
in custom fitting.

04102300

Arizona Custom Grips

About our exclusive Magna-Tusk™ “Hi-Grade”
Ivory Grips:

 Our Ivory grips, an exclusive of Arizona Custom Grips,
are made out of a premium high-grade, ultra-high density ivory material (Magna-Tusk™), designed from the ground
up as a premium grip material to greatly improve on the inherent fragility and
weakness of the cheaper Bonded Ivory used on just about all factory and regular
aftermarket ivory grips today.  Standard
Bonded Ivory is brittle, and tends to weaken and develop stress fractures over
time with repeated use, firing, and handling. 
Magna-Tusk™ is capable of withstanding the heaviest recoil and impact,
and is the toughest alternative Ivory grip material available today, while
still retaining the pristine look of real ivory.  These grips are not
cast or made out of an inferior, lightweight material, but are heavy and dense,
carefully milled out of a solid block, one at a time.  Magna-Tusk is completely rock-solid, stable,
and water, chemical, and oil resistant.  It is flame and heat resistant,
will not melt like Urethane or plastic, and is entirely void-free, with over
10x the strength, durability, and impact resistance of alternative
materials.  Unlike with real ivory, there is no routine care and
maintenance involved, with no danger of it drying out and cracking if not
maintained properly or if left in the heat.  It is produced with outstanding
aesthetic properties and mechanical performance.  When aged with our
exclusive aging process, it takes on the equivalent of a 100-year-old patina,
with subtle grain details which most experts cannot tell apart from the real
thing.  In addition, the material has a fine grain structure, which
holds intricate detail for carvings, artistic relief work, etc., found on many
historic grips. 

Please note that the photo used is a stock photo (a
sample pair).  Yours will appear similar to these. 

Customer satisfaction is important to us.  Full money back, less shipping, if not fully satisfied!

Listed with ExportYourStore.com