PIETTA FRONTIER, PISTOLERO, GREAT WESTERN II MAGNA-TUSK™ 2P IVORY GRIPS ~ GW 2

Arizona Custom Grips

PIETTA SAA

* PIETTA / CIMARRON FRONTIER,
PISTOLERO, EL MALO, etc.;

* PIETTA / EMF GREAT WESTERN II
(includes most GW II models); and

* OTHER Misc. PIETTA SAA Style REVOLVERS
(Davidson’s Exclusive 1873, etc.)

(See below for
further details)

~ Exclusive ~

  MAGNA-TUSK™

white ivory GRIPS

Milled out of a solid block of Magna-Tusk,
denser and heavier than regular Ivory or Stag. 
See below for details.

~~~~~

two-PIECE
(with SCREWHOLE) STYLE grips

THIS LISTING IS FOR OUR
TWO-PIECE (SCREWHOLE) STYLE GRIPS

********

ONE-PIECE VS. TWO-PIECE STYLE GRIPS EXPLAINED:

Note: One-Piece style grips do not have a visible
screw but instead use an internal spacer to mount the grips.  Two-Piece style grips incorporate a visible
screw, allowing easy and quick removal for cleaning or maintenance of your
revolver.  We manufacture both
types.  Both styles of our grips will
interchange and work on either style of grip frame, no matter how your revolver
is currently set up.  Both styles are
traditional and historical designs and both were originally used on early
Colts, so whichever style you choose is really a matter of personal
preference. 

One-Piece
style grips (i.e., grips with no visible screwhole in the grips) incorporate a spacer
(included with the grips) which is user mounted to the inside of the grip
panels to hold them in place instead of a using a screw.  To ensure optimum fit and best performance, the
spacer is sent unmounted since all gripframes vary slightly in inside
dimensions.  Installation is simple and generally
takes only a few minutes.  Illustrated
instructions included with each order. 
This results in a rock-tight fit, without the need of a screw.  One-Piece grips are preferred by many
collectors for their clean lines and traditional look, and are seen on many
early Colts. Once mounted, they are fully removable by removing the three
backstrap screws, and will not alter your revolver in any way.  Reinstallation is in reverse order. 

Alternatively, our Two-Piece style
grips (i.e., grips with a visible screw) offer the superior convenience of
quick grip removal using only the screw (also included with the grips).  Our Two-Piece style grips also include our
proprietary Conversion Kit, allowing
their use on revolvers that do not have a grip pin in the frame (as is the case
with most Italian-made revolvers and others that currently have a one-piece
style grip).  The Conversion Kit replaces
the need for a grip pin and is actually a stronger design, and allows the grips
to lock up tight on the frame, allowing no movement.  This
requires no modification to your revolver. 
Two-piece grips give you the advantage of easier access to your revolver
for cleaning and maintenance, while preserving the integrity of your revolver
in original factory condition. Two-Piece style grips were also used
on many of the early Colts, and are a traditional and iconic historical design,
offering a distinctive look and convenience preferred by many shooters and collectors.

Fully
illustrated, easy-to-follow mounting instructions are included with every order. 

Rev
1228 2300

~~~~~

WHAT THESE WILL FIT

(Please
read this entire section carefully):

These WILL FIT any of the PIETTA Single Action Army style revolvers, with the standard sized SAA “plowhandle”
grip frame, which measures around 3-1/8” tall.  [Please see the notes below
regarding brass gripframes if that is what you have, and also the non-standard,
taller sized 1860 Army sized gripframes].

This includes any of the following (all of which are made by Pietta
and imported by Cimarron, E.M.F., Taylor’s & Co., etc.):

•  Cimarron Frontier or Stainless Frontier, Pistolero, or El Malo (NOT
the El Malo 2);

•  Davidson’s Exclusive 1873s (sometimes also
marked “Pietta 1873 Gunfighter”, “Pietta
1873 Rio” or “Del Rio Deluxe”, “Pietta 1873 Centennial”, “Pietta El Diablo”, etc.);

•  E.M.F. Great
Western II (available in numerous variations including the Blank Firing, Buntline, Californian, Dlx Californian, Dlx Grande Californian, Cattlebrand,
Dlx Stainless Steel, Express Agent (“Standard” gripframe ONLY), Frontier, Gambler’s
Royale, General Patton, Gunfighter, Liberty, Midnight Special, Paladin, Pony
Express (“Standard” gripframe ONLY), Posse, “R” Model, Sheriff, The Last Stand,
The Shootist, U.S. Marshal, and U.S. Grant). 
-- Please note that these will NOT fit the “Alchimista” models – see
below.

•  E.M.F. Hartford,
Dakota II, or Dakota III;

•  Taylor’s & Co. TC9 revolvers with the Checkered
Black Plastic grips.  This revolver
uses the standard (Navy sized) gripframe, measuring around 3-1/8” tall or a
little under.  >> Please note that
these grips WILL NOT FIT the TC9 with
the Checkered Walnut grips, which is a taller (1860 Army sized) gripframe,
measuring around 3-1/2” tall.  Please see
our store and look for our Pietta 1860 grips if you have one of these.

•  Taylor’s & Co. Outlaw Legacy (NOT the Remington Outlaw), Single Action Stag, Cattle Brand Engraved, or other Engraved Pietta Revolvers such as Teddy Roosevelt, Patton, Cattlebrand, etc.;

•  Any of Pietta’s engraved SAA style revolvers being sold under various names
not mentioned above, such as the Teddy
Roosevelt Frontier, George S. Patton Frontier, Cimarron Buffalo Bill Cody, Cody
Wild West Frontier, Bat Masterson Frontier, Outlaw Legacy, Bill Tilghman
Cattleman, Cimarron Texas Ranger, etc. 

•  Traditions Single Action Frontier or Rawhide revolvers.  (Note: if your Rawhide revolver is the .22 cal. Rawhide Ranchhand, please send
us an immediate followup email after your order and let us know.  These require extra milling cutouts to mount
properly to your frame.)

•  Century Arms 1873 Millenium

Note: If you do
not see your pistol listed, please drop us an email with your model name and we
will verify your revolver.

IMPORTANT!! (Please read the following in its
entirety to ensure that you get the correct grips):

1) Please note that
Pietta has used several different grip frame variations over the years.  To ensure that we send the correct grips,
when ordering please attach a message to your order stating the two-digit code
found in the small rectangular box on your revolver (as shown in the 2^nd
picture in the listing).  If you have a
newer revolver and cannot find the code, please send the first three digits of
your serial number so we can identify your particular revolver.  If we do not hear back from you, we will send
the most common version of grips to ensure we get these out on time.

2) Also, if you have a BRASS gripframe (such as is sometimes found on the Cimarron “Pistolero”, Davidson’s Exclusive 1873s, EMF’s GWII “Gunfighter”, or Taylor’s “1873
Single Action Stag” revolvers, for example), please attach a note to your
order informing us.

 3)
Finally, please note that these WILL NOT fit Pietta gripframes that are
around 3-1/2” tall (such as EMF’s Alchimista,
or Cimarron’s Bad Boy or El Malo 2).  Your grips should measure around 3-1/16” to
3-1/8” tall, depending on how you hold your ruler or caliper.  Please check this carefully before ordering.  If your grips measure 3-1/2”, our Pietta 1860
Army grips are milled to fit these, which you can find in our store.  Please feel free to contact us if you cannot
locate what you need.

What these WILL NOT FIT: 

These WILL NOT FIT any revolvers from
other makers (such as Uberti, Armi San Marco, Colt, Ruger, etc.).  Also, these will NOT fit revolvers
using a gripframe that is not the standard “plowhandle” shape, such as the
Bisley, the Birdshead, the Thunderer, Thunderball, or the Lightning style gripframes,
nor any of the Remington style revolvers such as the 1858, 1875, or 1890. 
Please take a careful look at the shape of your gripframe.  These are for the “plowhandle” style
revolvers only.

08152300

A note on
the Italian-produced Revolvers:

The
Italian firms, located in Northern Italy, have been making SAA style revolvers
now for well over a half century, and have made a huge number of makes and
models and grip frame profiles with varying configurations over the years.  We have an in-depth knowledge of the
differing grip configurations, have a large library of gripframe variations
from the various makers both old and new, and have vast experience making grips
for Uberti, Pietta, Armi San Marco, and the other Italian gunmaking firms.   Our experienced makers go to great lengths
to ensure an exacting fit, including utilizing modern precision CNC production
techniques, as well as incorporating old-time hand tuning and hand checking the
fit of every grip on our reference frames prior to leaving our factory.  We have a long list of many satisfied
customers in the shooting industry who have purchased grips to use in a wide
variety of applications, and we can safely and confidently guarantee proper fit
and finish to your complete satisfaction.

For an additional
charge, custom fitting is an option. 
Please contact us for further details if you are interested in custom
fitting.

23071945

Arizona Custom Grips

About Magna-Tusk™ Ivory
and Stag Grips:

 Magna-Tusk™ Ivory and Stag grips, a
product of Arizona Custom Grips, are manufactured out of our
high-grade, high density ivory material designed from the beginning as a
premium, high-strength grip material.  Vastly
superior to standard bonded ivory or stag found on most factory and other
aftermarket grips, Magna-Tusk™ is capable of withstanding the heaviest recoil
and impact, and is the toughest alternative grip material available today,
while still retaining the pristine look of real ivory or stag.  It is
rock-solid, stable, and water, chemical, and oil resistant.  It is
flame and heat resistant, and is entirely void-free, with over 10x the
strength, durability, and impact resistance of alternative
materials.  Unlike with real ivory or stag, there is no routine care
and maintenance involved, with no danger of it drying out and cracking if not
maintained properly or if left in the heat.  It is filled with
premium natural compounds to produce outstanding aesthetic properties and
mechanical performance.  When aged with our natural aging process, it
takes on the equivalent of a 100-year-old patina, with subtle grain details
which many experts cannot tell apart from the real thing.  In
addition, the material has a fine grain structure, which holds intricate detail
for carvings, artistic relief work, etc., found on many historic grips.  

08292000

Please note that the photo used is a stock photo (a
sample pair).  Yours will appear similar to these. 

Customer
satisfaction is important to us – Full money back, less shipping, if not completely satisfied!!