PIETTA 1860 ARMY BLACKPOWDER AND CARTRIDGE REVOLVERS; ADI AGED IVORY CHECK GRIPS
PIETTA 1860 ARMY BLACKPOWDER AND CARTRIDGE REVOLVERS; ADI AGED IVORY CHECK GRIPS
Arizona Custom Grips
Pietta
1860 Army
Cap & Ball and Cartridge Revolvers (see below):
- Pietta 1860 Army Blackpowder (Cap
and Ball) Percussion Revolvers -
- Pietta 1851 Navy “Yank Steel” (in
.44 Caliber, 1860 sized grip frame) -
- Pietta (Traditions, etc.) Frontier in
.44 Magnum, and select .357 Magnums, with the 1860 sized grip frame -
- Pietta (EMF) Great Western II:
Alchimista I, II, and III -
- Pietta (Cimarron) El Malo II (NOT
the El Malo I)–
- Pietta (Cimarron) Eliminator -
- and other Pietta Revolvers with the
1860 Army sized gripframe -
~see below for specific details~
~ Exclusive ~
MAGNA-TUSK™
Aged distressed ivory GRIPS
with classic style checkering
Milled out of a solid block of
Magna-Tusk, denser and heavier than regular Ivory or Stag. See below for details.
~~~~~
two-PIECE
(with SCREWHOLE) STYLE
THIS AUCTION IS FOR OUR
TWO-PIECE (SCREWHOLE) STYLE GRIPS. SEE BELOW.
********
Note: Two-Piece grips,
in addition to a visible screw, have a grip pin installed in the frame to help hold
them in place. One-Piece grips (grips
with no visible screw) use a spacer between the panels, with no screw and no grip
pin. BOTH styles of our grips will
interchange and work on either style of grip frame. See below.
One-Piece style grips (i.e., grips
which do not have a visible screwhole in the grips) incorporate a user
installed spacer between the grip panels, as seen on many of the early
Colts. This results in a rock-tight fit,
without the need of a screw. Preferred
by many collectors for their clean lines and traditional look, One-Piece style
grips are removed by removing the three backstrap screws, and pulling the grip
and backstrap backwards. Reinstallation
is in reverse order. Our One-Piece style
grips will work on either style gripframe (either One-Piece or Two-Piece style grip
frames). Fully illustrated instructions
included for quick and easy installation.
Alternatively, our Two-Piece style
grips (i.e., grips with a visible screw) offer the superior convenience of
quick grip removal. Unlike with
One-Piece grips, the backstrap need not be removed to remove the grips for
cleaning and maintenance of the revolver.
Our Two-Piece grips include a free Conversion kit (allowing their use on One-Piece style frames) which
replaces the need for a grip pin and is actually a stronger design, and allows
the grips to lock up tight, allowing no movement. This
requires no modification to your revolver and gives you the advantage of the
ease of maintenance of Two-Piece grips, while preserving the integrity of your
revolver in original factory condition. Two-Piece style grips were
also used on many of the early Colts, and are a traditional and iconic
historical design, offering a distinctive look and convenience preferred by
many collectors.
Fully illustrated, detailed instructions
are included with each set of grips. 22010345
~~~~~
WHAT THESE WILL FIT:
(Note: Please read these
paragraphs thoroughly, including the “Will NOT Fit” section below).
These grips WILL FIT all of the
following:
Blackpowder Revolvers:
* Pietta 1860 Army .44 Caliber Blackpowder (Cap
& Ball Percussion) revolvers;
* Pietta 1851
Navy Steel Frame Blackpowder Revolvers in .44 Caliber Only (Note: these have the 1860 Army (3-1/2” tall)
sized gripframe; these grips will NOT fit the other 51 Navy’s with the shorter
3-1/8” gripframe);
Cartridge Revolvers:
* Pietta (Traditions, etc.) Frontier .44 Magnum
(and a few .357 Magnum Frontiers using the 3-1/2” tall 1860 grip frame);
* Pietta (EMF) Great Western II Alchimista I,
II, or III;
* Cimarron El Malo II (Note: will NOT fit the El
Malo I);
* Cimarron Eliminator;
*
AND ALL other Pietta Cartridge
Firing revolvers using the
1860 Army sized (3-1/2” high) grip frame.
To make sure you are
ordering the correct grip, please check your grip frame measurement
prior to ordering. Your grips or grip frame should measure somewhere
around 3-1/2” tall, depending on how you hold your ruler,
tape, or caliper. The important thing is to make sure they are NOT around
3-1/16 – 3-1/8” tall, which requires our standard (shorter) 1873 SAA sized
grip. Please contact us if you have any questions, or cannot find the
proper grip, and we will be happy to help.
What these will NOT fit:
These grips are made to
fit ONLY Pietta revolvers, and will NOT fit
anything made by Uberti, Armi San Marco, Colt, or any other manufacturer.
If you have one of these other makes of revolvers and cannot find the grip you
need, please contact us and we will be happy to help.
Also, please note that
these will NOT fit the Bisley, the Birdshead, the
Thunderer, Thunderball, or the Lightning style revolvers, which use a
completely different
We also offer these Custom Fit to your revolver gripframe in
separate auction listings, for those interested.
22011965
Arizona Custom Grips
About our exclusive Magna-Tusk™ “Hi-Grade”
Ivory and Stag Grips:
Magna-Tusk™ Ivory and Stag grips, an
exclusive of Arizona Custom Grips, are manufactured out of our
super high-grade, ultra-high density material developed exclusively for our
premium grip production. Vastly superior to standard bonded ivory or
stag found on factory and other aftermarket grips, Magna-Tusk™ is capable of
withstanding the heaviest recoil and impact, and is the toughest alternative grip
material available today, while still retaining the pristine look of real ivory
or stag. It is completely rock-solid, stable, and water, chemical,
and oil resistant. It is flame and heat resistant, and is entirely
void-free, with over 10x the strength, durability, and impact resistance of
alternative materials. Unlike with real ivory or stag, there is no
routine care and maintenance involved, with no danger of it drying out and
cracking if not maintained properly or if left in the heat. It is
filled with premium natural and synthetic compounds to produce outstanding
aesthetic properties and mechanical performance. When aged with our
exclusive aging process, it takes on the equivalent of a 100-year-old patina,
with subtle grain details which many experts cannot tell apart from the real
thing. In addition, the material has a fine grain structure, which
holds intricate detail for carvings, artistic relief work, etc., found on many
historic grips.
About Our Aging Process:
Unlike
the lightweight artificial yellow plastic materials sometimes offered for sale,
Magna-Tusk aged grips start out as a solid block of white virgin Magna-Tusk
Ivory. Grip blanks are then milled from
this premium material, incorporating both CNC techniques for blanking and
finishing techniques similar to those used in manufacturing the originals. They are then carefully aged with our
exclusive aging process, incorporating concentrated UV light (the essential
aging property in natural sunlight).
Our process produces an authentic appearance and genuine patina
which extends into the surface, just like real ivory or stag. Not only does this
give it the appearance of authenticity and depth, but this surface will not
chip, crack, or peel like a superficially applied coating. Accept no substitutes. With Magna-Tusk aged grips, most experts cannot tell them apart
from a decades-old or even a centuries-old original. While the quality difference is somewhat
noticeable in the photos, the difference is even more apparent when seen and
handled in person. Many of our repeat
sales are made by the very customers we sell to, who take their custom-stocked
revolvers to the range or club, where the quality difference is immediately
seen and appreciated by fellow shooters.
Magna-Tusk grips have all the authenticity of the originals, with
several improvements over original materials including increased durability,
and are made to last a lifetime. They
feature subtle but authentic color mottling, grain variegation, and other
authentic minute details found on original old Ivory and aged Stag, as seen on
many of the revolvers which belonged to gunfighters and lawmen of the Old
West. Dense, heavy, and solid, Magna-Tusk grips are in a class all their
own. With our exclusive aging process, these grips
are outstanding right out of the box, and will continue to improve over
time. The more these grips are handled
and used, the better they look!
030120
The photo used is a stock photo (a sample
pair). Yours will appear similar to these.
Customer
satisfaction is important to us – we guarantee we will do our best to ensure
your complete satisfaction!!
Listed with ExportYourStore.com