PIETTA 1860 ARMY BLACKPOWDER & CARTRIDGE REVOLVERS; ONE-PIECE AGED SCROLL GRIPS

Arizona Custom Grips

Pietta

1860 Army

Cap & Ball and Cartridge Revolvers (see below):

- Pietta 1860 Army Blackpowder (Cap
and Ball) Percussion Revolvers -

- Pietta 1851 Navy “Yank Steel” (in
.44 Caliber, 1860 sized grip frame) -

- Pietta (Traditions, etc.) Frontier in
.44 Magnum, and select .357 Magnums, with the 1860 sized grip frame -

- Pietta (EMF) Great Western II:
Alchimista I, II, and III -

- Pietta (Cimarron) El Malo II (NOT
the El Malo I)–

- Pietta (Cimarron) Eliminator -

- and other Pietta Revolvers with the
1860 Army sized gripframe -

~see below for specific details~

~ Exclusive ~

  MAGNA-TUSK™ 

Aged ivory GRIPS

with scroll engraving

Milled out of a solid block of
Magna-Tusk, denser and heavier than regular Ivory or Stag.  See below for details.

~~~~~

oNE-PIECE
(nO SCREWHOLE) STYLE

THIS AUCTION IS FOR OUR
ONE-PIECE (NO SCREWHOLE) STYLE GRIPS.  SEE BELOW.

********

Note: Two-Piece grips,
in addition to a visible screw, have a grip pin installed in the frame to help hold
them in place.  One-Piece grips (grips
with no visible screw) use a spacer between the panels, with no screw and no grip
pin.  BOTH styles of our grips will
interchange and work on either style of grip frame.  See below.

One-Piece style grips (i.e., grips
which do not have a visible screwhole in the grips) incorporate a user
installed spacer between the grip panels, as seen on many of the early
Colts.  This results in a rock-tight fit,
without the need of a screw.  Preferred
by many collectors for their clean lines and traditional look, One-Piece style
grips are removed by removing the three backstrap screws, and pulling the grip
and backstrap backwards.  Reinstallation
is in reverse order.  Our One-Piece style
grips will work on either style gripframe (either One-Piece or Two-Piece style grip
frames).  Fully illustrated instructions
included for quick and easy installation.

Alternatively, our Two-Piece style
grips (i.e., grips with a visible screw) offer the superior convenience of
quick grip removal.  Unlike with
One-Piece grips, the backstrap need not be removed to remove the grips for
cleaning and maintenance of the revolver. 
Our Two-Piece grips include a free Conversion kit (allowing their use on One-Piece style frames) which
replaces the need for a grip pin and is actually a stronger design, and allows
the grips to lock up tight, allowing no movement.  This
requires no modification to your revolver and gives you the advantage of the
ease of maintenance of Two-Piece grips, while preserving the integrity of your
revolver in original factory condition. Two-Piece style grips were
also used on many of the early Colts, and are a traditional and iconic
historical design, offering a distinctive look and convenience preferred by
many collectors.

Fully illustrated, detailed instructions
are included with each set of grips.  22010345

~~~~~

WHAT THESE WILL FIT:

(Note: Please read these
paragraphs thoroughly, including the “Will NOT Fit” section below).  

These grips WILL FIT all of the
following: 

Blackpowder Revolvers:

          * Pietta 1860 Army .44 Caliber Blackpowder (Cap
& Ball Percussion) revolvers;

          * Pietta 1851
Navy Steel Frame Blackpowder Revolvers in .44 Caliber Only (Note: these have the 1860 Army (3-1/2” tall)
sized gripframe; these grips will NOT fit the other 51 Navy’s with the shorter
3-1/8” gripframe); 

Cartridge Revolvers:

* Pietta (Traditions, etc.) Frontier .44 Magnum
(and a few .357 Magnum Frontiers using the 3-1/2” tall 1860 grip frame);

* Pietta (EMF) Great Western II Alchimista I,
II, or III;

* Cimarron El Malo II (Note: will NOT fit the El
Malo I);

* Cimarron Eliminator;

*
AND ALL other Pietta Cartridge
Firing revolvers using the
1860 Army sized (3-1/2” high) grip frame. 

To make sure you are
ordering the correct grip, please check your grip frame measurement
prior to ordering.  Your grips or grip frame should measure somewhere
around 3-1/2” tall, depending on how you hold your ruler,
tape, or caliper.  The important thing is to make sure they are NOT around
3-1/16 – 3-1/8” tall, which requires our standard (shorter) 1873 SAA sized
grip.  Please contact us if you have any questions, or cannot find the
proper grip, and we will be happy to help.

What these will NOT fit: 

These grips are made to
fit ONLY Pietta revolvers, and will NOT fit
anything made by Uberti, Armi San Marco, Colt, or any other manufacturer. 
If you have one of these other makes of revolvers and cannot find the grip you
need, please contact us and we will be happy to help.

Also, please note that
these will NOT fit the Bisley, the Birdshead, the
Thunderer, Thunderball, or the Lightning style revolvers, which use a
completely different

We also offer these Custom Fit to your revolver gripframe in
separate auction listings, for those interested.

22011965

Arizona Custom Grips

About Magna-Tusk™ Ivory
and Stag Grips:

 Magna-Tusk™ Ivory and Stag grips, a
product of Arizona Custom Grips, are manufactured out of our
high-grade, high density ivory material designed exclusively as a premium,
high-strength grip material.  Vastly
superior to standard bonded ivory or stag found on most factory and other
aftermarket grips, Magna-Tusk™ is capable of withstanding the heaviest recoil
and impact, and is the toughest alternative grip material available today,
while still retaining the pristine look of real ivory or stag.  It is
rock-solid, stable, and water, chemical, and oil resistant.  It is
flame and heat resistant, and is entirely void-free, with over 10x the
strength, durability, and impact resistance of alternative materials.  Unlike
with real ivory or stag, there is no routine care and maintenance involved,
with no danger of it drying out and cracking if not maintained properly or if
left in the heat.  It is filled with premium natural compounds to
produce outstanding aesthetic properties and mechanical
performance.  When aged with our natural aging process, it takes on
the equivalent of a 100-year-old patina, with subtle grain details which many
experts cannot tell apart from the real thing.  In addition, the
material has a fine grain structure, which holds intricate detail for carvings,
artistic relief work, etc., found on many historic grips.  

08292000

About Our Aging Process:

We
go to great efforts to ensure that our Aged Ivory or Stag not only looks similar to, but in fact looks identical to the real thing.  Our Magna-Tusk blanks will produce an aged
Ivory grip unlike any other material made today.  Our aged grips feature an
authentic aged patina, just like the originals, with a process incorporating
concentrated U.V. light (the essential aging property in natural sunlight), along
with a developer/control agent that is put on the grips to carefully control
U.V. absorption, in a sealed, high-oxygen environment to accelerate the natural
aging process. 

Through
this aging process, these grips become beautifully mottled, variegated, and
weathered just like old, antique Ivory,
and incorporate other authentic details found on original old Ivory as seen on
many of the revolvers which belonged to gunfighters and lawmen of the Old West.  As with real aged Ivory, Magna-Tusk develops
a variegated patina due to its authentic grain structure, and natural aging
produces an authentic appearance and genuine patina which extends into and
below the surface.  Not only does this give it the appearance of
authenticity and depth, but this surface will not chip, crack, or peel like a
superficially applied coating.  With Magna-Tusk aged
grips, most experts cannot tell them apart from a decades-old or even a
centuries-old original.  While the
quality difference is somewhat noticeable in the photos, the difference is even
more apparent when seen and handled in person. 
Many of our repeat sales are made by the very customers we sell to, who
take their grips to the range, where our grips are immediately seen and noticed
by others.  If you are interested in
ordering grips for a Brace of pistols, please order both sets together, and we
will ensure a better matchup when selecting pairs. 

Dense, heavy, and solid, Magna-Tusk grips are in a class all their
own. With our exclusive aging process, these grips
are outstanding right out of the box, and will continue to improve over
time.  The more these grips are handled
and used, the better they look!

08292000

Please note that the photo used is a stock photo (a
sample pair).  Yours will appear similar to these. 

Customer
satisfaction is important to us – we guarantee your complete satisfaction with every purchase!!