PIETTA THUNDERBALL El Malo 2 1851 1860 Yank Navy Army Snub CH IVORY GRIPS (QR)
PIETTA THUNDERBALL El Malo 2 1851 1860 Yank Navy Army Snub CH IVORY GRIPS (QR)
Arizona Custom Grips
PIETTA THUNDERBALL
And additional
similar Pietta manufactured revolvers, such as:
~ the Cimarron El Malo 2, Cimarron
Huckleberry (and similar Engraved revolvers made by Pietta), Taylor’s & Co.
Flattop Birdshead, EMF Pony Express or Express Agent, EMF Alchimista Jr., Pietta
1851 Navy or Yank Snubnose, and Pietta 1860 Army Snubnose ~
~ Exclusive~
MAGNA-TUSK™
ivory GRIPS
+ Classic checkering
Milled out of a solid block of
Magna-Tusk, denser and heavier than regular Ivory or Stag (see below for
details)
Brand
New!!
(QR Coded Packaging)
~~~~~
two-PIECE
(with SCREWHOLE) STYLE
THIS AUCTION IS FOR OUR
TWO-PIECE (SCREWHOLE) STYLE GRIPS. SEE BELOW.
********
A Choice for Every
User! Two-Piece grips, in addition to a visible screw, have a grip pin installed
in the grip frame to help hold them in place.
One-Piece grips (grips with no visible screw) use a spacer between the
panels, with no screw and no grip pin. Our
grips will interchange and work on either style of grip frame. See below.
One-Piece style grips (i.e., grips
which do not have a visible screwhole in the grips) incorporate a user
installed spacer (included with the grips) between the grip panels, as seen on
many of the early Colts. This results in
a rock-tight fit, without the need of a screw.
Preferred by many collectors for their clean lines and traditional look,
One-Piece style grips are removed by removing the three backstrap screws, and
pulling the grip and backstrap backwards.
Reinstallation is in reverse order.
Our One-Piece style grips will work on either style gripframe (either
One-Piece or Two-Piece style grip frames).
Fully illustrated instructions included for quick and easy installation.
Alternatively, our Two-Piece style
grips (i.e., grips with a visible screw) offer the superior convenience of
quick grip removal. Unlike with
One-Piece grips, the backstrap need not be removed to remove the grips for
cleaning and maintenance of the revolver.
Our Two-Piece grips include a free Conversion kit (allowing their use on One-Piece style frames) which
replaces the need for a grip pin and is actually a stronger design, and allows
the grips to lock up tight, allowing no movement. This
requires no modification to your revolver and gives you the advantage of the
ease of maintenance of Two-Piece grips, while preserving the integrity of your
revolver in original factory condition. Two-Piece style grips were
also used on many of the early Colts, and are a traditional and iconic
historical design, offering a distinctive look and convenience preferred by
many collectors.
Fully illustrated, detailed instructions
are included with each set of grips. 07082200
~~~~~
WHAT THESE WILL FIT:
Brand New, unused grips
for the PIETTA THUNDERBALL revolvers.
These will
also fit the following, all of which are made by Pietta and have the “humped
curve” backstrap style gripframe:
* Cimarron El Malo 2,
* Cimarron Huckleberry
(and similar Engraved revolvers made by Pietta),
* Taylor’s & Co.
Flattop Birdshead,
* EMF Pony Express or
Express Agent,
* EMF Alchimista Jr.,
* Pietta 1851 Navy
Snubnose (sold by Taylor’s, Dixie, etc.),
* 1851 Yank Snubnose
(sold by Taylor’s, Dixie, etc.),
* Pietta 1860 Army
Snubnose (sold by Taylor’s, EMF, etc.)
PLEASE NOTE: This auction is for the revolvers which
have the HUMPED CURVE on the backstrap, and will NOT fit
the somewhat similar Pietta Birdshead style, which has a smooth curved
backstrap. Please also note that these will NOT fit standard “plowhandle” style gripframes. Your gripframe MUST be the “humped curve”
backstrap style for these to fit. Please
take a close look at the pictures and carefully note the
difference.
Also please note that
these are made for the Pietta revolvers ONLY, and will NOT fit
the Uberti Thunderer, or any other brand of revolver. Pietta
revolvers only.
We have a large
selection of grips for these other revolvers, including both the Pietta and the
Uberti Birdsheads, so please see our other listings, or drop us an email if you
cannot find what you need. We are always
happy to help.
07152200
Arizona Custom Grips
About our exclusive Magna-Tusk™ “Hi-Grade” Ivory Grips:
Magna-Tusk™ Ivory grips, an exclusive of Arizona
Custom Grips, are manufactured out of a super high-grade, ultra-high
density Ivory material developed exclusively for our premium grip
production. Vastly superior to standard
bonded ivory found on factory and other aftermarket Ivory grips, Magna-Tusk™ is
capable of withstanding the heaviest recoil and impact, and is the toughest
alternative ivory material available today, while still retaining the pristine
look of real ivory. It is completely
rock-solid, stable, and water, chemical, and oil resistant. It is flame and heat resistant, and is
entirely void-free, with over 10x the strength, durability, and impact
resistance of alternative materials.
Unlike with real ivory, there is no routine care and maintenance
involved, with no danger of it drying out and cracking if not maintained
properly or if left in the heat. It is
filled with premium natural and synthetic compounds to produce outstanding
aesthetic properties and mechanical performance. When aged with our exclusive aging process,
it takes on the equivalent of a 100-year-old patina, with subtle grain details
which many experts cannot tell apart from the real thing. In addition, the material has a fine grain
structure, which holds intricate detail for carvings, imitation stag, etc.,
found on many historic grips.
The photo used is a stock photo (a sample
pair). Yours will appear similar to these.
Customer
satisfaction is important to us – we guarantee we will do our best to ensure
your complete satisfaction!!
Listed with ExportYourStore.com