RUGER BLACKHAWK, VAQUERO, SINGLE SIX, SBH Rnd ~ Magna-Tusk™ ADI IVORY GRIPS qr

Arizona Custom Grips

Ruger Blackhawk; Old Vaquero; Single Six; Super Blackhawk (with Round Trigger Guard Only); & More (see below)

~ Exclusive~

     MAGNA-TUSK™

Aged distressed ivory GRIPS

Milled out of a solid block of Magna-Tusk, denser and heavier than regular Ivory or Stag.  See below for details.

(QR Coded Packaging) 

-- Precision Made in the United States of America --

(Please read this entire section carefully in order to make sure you get the correct grips):

These grips WILL FIT the following Ruger revolvers:

● Ruger Blackhawks (these grips are machined to fit both the “New Models”, and the “Old” (3-screw) model Blackhawks).

Exception: If your revolver is a “Flattop” (please see photo above), these will NOT fit.  Please see our “New Vaquero” listings for the correct grips. 

Additional Exception: If your revolver was made prior to 1963, please see our "Pre-1963" Blackhawk and Single Six listings for the correct grips.  If you are unsure of the year, please email us your serial number and we can look it up.

●Ruger Vaquero (Old Style)

Note: these will only fit the “original” Vaquero and NOT the “New Vaquero,” except the .44 Magnum version.  The original Vaqueros have a 2-digit serial number prefix (i.e., 55-xxxxx), so please check and verify that prior to ordering.  The New Vaqueros have a 3-digit prefix (i.e., 555-xxxxx), and will not work unless it is in the .44 Magnum chambering.  Please contact us for help if you have any questions. 

●New Vaquero, in .44 Magnum Caliber only. 

Note: these will work with the .44 Magnum New Vaquero but will not work with any other New Vaquero revolver.  Please see our New Vaquero grip section in our store if you have other than a .44 Magnum.

●Single Six, Single Seven, Single Nine, Single Ten

Exception: if your revolver is made prior to 1963, these will NOT fit.  Please see our "Pre-1963" Blackhawk or Single Six grip listings for the correct grips. 

●Ruger Old Army

Exception: a very limited number of Old Armys are fitted with non-standard gripframes which are made of brass and have a square-backed triggerguard (not round).  If you have one of these, please let us know and we will help you get the correct grips.

●All Super Blackhawks with a round trigger guard.

Exception: if you have the Hunter model (it will say “Hunter” on the revolver), these grips will NOT fit.  Our grips for the square-backed trigger guard Super Blackhawk are the correct ones for the Hunter model. 

Note that these will NOT fit any Super Blackhawk with a square-backed trigger guard (again, please see our listings for the square-backed Super Blackhawk if you have one of these).  Please contact us if you have any questions or cannot find what you need.

(Note: These will NOT fit your revolver if you have a Bisley or Birdshead style gripframe, both of which are a completely different shape from the one in the photo.  If you are unsure, please contact us and we will be happy to get you the correct grips as we have grips for nearly every Ruger revolver).

If you have any questions or are unsure which revolver you have, please drop us an email.  We’ll be happy to help!!

Rev.25121855

Arizona Custom Grips

About our exclusive Magna-Tusk™ “Hi-Grade” Ivory and Stag Grips:

Magna-Tusk™ Ivory and Stag grips, an exclusive of Arizona Custom Grips, are manufactured out of our super high-grade, ultra-high density material developed exclusively for our premium grip production.  Vastly superior to standard bonded ivory or stag found on factory and other aftermarket grips, Magna-Tusk™ is capable of withstanding the heaviest recoil and impact, and is the toughest alternative grip material available today, while still retaining the pristine look of real ivory or stag.  It is completely rock-solid, stable, and water, chemical, and oil resistant.  It is flame and heat resistant, and is entirely void-free, with over 10x the strength, durability, and impact resistance of alternative materials.  Unlike with real ivory or stag, there is no routine care and maintenance involved, with no danger of it drying out and cracking if not maintained properly or if left in the heat.  It is filled with premium natural and synthetic compounds to produce outstanding aesthetic properties and mechanical performance.  When aged with our exclusive aging process, it takes on the equivalent of a 100-year-old patina, with subtle grain details which many experts cannot tell apart from the real thing.  In addition, the material has a fine grain structure, which holds intricate detail for carvings, artistic relief work, etc., found on many historic grips. 

About Our Aging Process:

Unlike the lightweight artificial yellow plastic materials sometimes offered for sale, Magna-Tusk aged grips start out as a solid block of white virgin Magna-Tusk Ivory.  Grip blanks are then milled from this premium material, incorporating both CNC techniques for blanking and being finished and polished with the same process used in manufacturing the originals.  They are then carefully aged with our exclusive aging process, incorporating concentrated UV light (the essential aging property in natural sunlight), in a hermetically sealed environment. 

Although this process is a much slower process than artificial coloring methods, the result speaks for itself.  Our process produces an authentic appearance and genuine patina which extends into the surface, just like real ivory or stag.  Not only does this give it the appearance of authenticity and depth, but this surface will not chip, crack, or peel like a superficially applied coating.  Accept no substitutes.  With Magna-Tusk aged grips, most experts cannot tell them apart from a decades-old or even a centuries-old original.  While the quality difference is somewhat noticeable in the photos, the difference is even more apparent when seen and handled in person.  Many of our repeat sales are made by the very customers we sell to, who take their custom-stocked revolvers to the range or club, where the quality difference is immediately seen and appreciated by fellow shooters.

Magna-Tusk grips have all the authenticity of the originals, with several improvements over original materials including increased durability, and are made to last a lifetime.  They feature subtle but authentic color mottling, grain variegation, and other authentic minute details found on original old Ivory and aged Stag, as seen on many of the revolvers which belonged to gunfighters and lawmen of the Old West.  Dense, heavy, and solid, Magna-Tusk grips are in a class all their own. With our exclusive aging process, these grips are outstanding right out of the box, and will continue to improve over time.  The more these grips are handled and used, the better they look!

112219

Grip screw included with all grips. 

The photo used is a stock photo (a sample pair) as we carry an assortment of this style grip.  Yours will appear similar to these. 

Customer satisfaction is important to us -- Full Money Back, less shipping, if not fully satisfied!!