UBERTI BIRDSHEAD 2P BLACK IVORY SCROLL GRIPS ~ Cimarron Cattleman, Stallion, etc
UBERTI BIRDSHEAD 2P BLACK IVORY SCROLL GRIPS ~ Cimarron Cattleman, Stallion, etc
Arizona
Custom Grips
UBERTI
BIRDSHEAD 1873
SINGLE ACTION ARMY STYLE REVOLVERS
~ Cattleman
Birdshead, Stallion Birdshead, Doc Holliday Birdshead, Bonney 1873 Cattleman
Birdshead, Kenda Leseigne Birdshead, Short Stroke CMS Pro Birdshead, etc. ~
~ See
below for details ~
~
Exclusive ~
MAGNA-TUSK™
Black ivory GRIPS
with scroll engraving
Milled
out of a solid block of Magna-Tusk, denser and heavier than regular Ivory or
Stag. See below for details.
The
Uberti Birdshead is the ideal concealable revolver for today’s Western
enthusiast. The Bird’s Head grip design has been incorporated into Uberti’s Cattleman series
of 1873 Single Action Army revolvers in both standard and Stallion designs.
They are available in various barrel lengths and calibers.
The Bird’s Head grip was originally designed for Colt
Derringers in the 1850s. In 1877, Colt incorporated the distinctive and
comfortable grip style into full-frame revolvers called Bird’s Head
Colts.
~~~~~
two-PIECE
(with SCREWHOLE) STYLE
THIS AUCTION IS FOR OUR
TWO-PIECE (SCREWHOLE) STYLE GRIPS. SEE BELOW.
********
ONE-PIECE VS. TWO-PIECE STYLE GRIPS:
A
Choice for Every User! Two-Piece style grips incorporate a visible screw and
screwhole, allowing easy and quick removal for cleaning or maintenance of your
revolver. One-piece style grips do not
use a screw but instead use an internal spacer.
Both styles are traditional and historical designs and both were
originally used on early Colts, so it is a matter of personal preference. Both styles of our grips will interchange
and work on either style of grip frame.
See below.
One-Piece style grips (i.e., grips
which do not have a visible screwhole in the grips) incorporate a user
installed spacer (included with the grips) between the grip panels, as seen on
many of the early Colts. The spacer is
sent unmounted to ensure optimum fit with your revolver, with simple, quick
installation which takes about one minute or so per grip. Fully illustrated instructions are
included. This results in a rock-tight
fit, without the need of a screw. Preferred
by many collectors for their clean lines and traditional look. One-Piece style
grips are removed by removing the three backstrap screws, and pulling the grip
and backstrap backwards. Reinstallation
is in reverse order.
Alternatively, our Two-Piece style
grips (i.e., grips with a visible screw and screwhole) offer the superior
convenience of quick grip removal. They include
a free Conversion kit, allowing
their use on revolvers that are currently using one-piece style grips that do
not have a grip pin. The conversion kit replaces
the need for a grip pin and is actually a stronger design, and allows the grips
to lock up tight on the frame, allowing no movement. This
requires no modification to your revolver and gives you the advantage of the
ease of maintenance of Two-Piece grips, while preserving the integrity of your
revolver in original factory condition. Two-Piece style grips were
also used on many of the early Colts, and are a traditional and iconic
historical design, offering a distinctive look and convenience preferred by
many collectors.
Fully illustrated, detailed instructions
are included with each set of grips. 01042300
~~~~~
WHAT
THESE WILL FIT (Please read this through in its entirety):
These grips WILL FIT the UBERTI BIRDSHEAD
1873 Single Action Army style revolvers. These grips will fit all Uberti Birdshead revolvers, whether
imported through Cimarron, Taylor’s & Co., Navy Arms, Stoeger, etc. If
it is made by Uberti, these will fit.
Please see the important note below.
*PLEASE NOTE – IMPORTANT!!:
If your Birdshead revolver is a “Doc Holliday” 1873 Cattleman birdshead, a
“Uberti Bonney” 1873 Cattleman birdshead,
a “Kenda Leseigne (CMS Pro) birdshead”,
a “Cattleman Stallion” birdshead, or a
“Uberti Short Stroke CMS Pro” birdshead,
please let us know via email immediately after the purchase, as these have special
grip requirements.
WHAT THESE WILL NOT FIT: this auction is for a Birdshead style grip, which has a smooth
curve on the backstrap, and will NOT
fit the somewhat similar Thunderer style revolvers (also made by Uberti and
marketed by Cimarron), which have a hump on the backstrap. Please
take a look at the pictures carefully to note the difference. If you
have a Thunderer style grip, please visit our store or check our other auctions
to find the correct grip. Or you can also click “Uberti” under our
Store Categories section at the left of this page.
Please
send us an email and tell us your specific model if you cannot locate what you
need, or if you have any questions. We
are always happy to help.
02182300
A note on the Italian-produced
Revolvers:
The Italian firms, located in Northern
Italy, have been making SAA style revolvers now for well over a half century,
and have made a huge number of makes and models and grip frame profiles with
varying configurations over the years.
We have an in-depth knowledge of the differing grip configurations, have
a large library of gripframe variations from the various makers both old and
new, and have vast experience making grips for Uberti, Pietta, Armi San Marco,
and the other Italian gunmaking firms.
Our experienced makers go to great lengths to ensure an exacting fit,
including utilizing modern precision CNC production techniques, as well as
incorporating old-time hand tuning and hand checking the fit of every grip on
our reference frames prior to leaving our factory. We have a long list of many satisfied
customers in the shooting industry who have purchased grips to use in a wide
variety of applications, and we can safely and confidently guarantee proper fit
and finish to your complete satisfaction.
For an additional charge, custom
fitting is an option. Please contact us
for further details if you are interested in custom fitting.
9212200
Arizona Custom Grips
About Magna-Tusk™ Ivory
and Stag Grips:
Magna-Tusk™ Ivory and Stag grips, a
product of Arizona Custom Grips, are manufactured out of our
high-grade, high density ivory material designed exclusively as a premium,
high-strength grip material. Vastly
superior to standard bonded ivory or stag found on most factory and other
aftermarket grips, Magna-Tusk™ is capable of withstanding the heaviest recoil
and impact, and is the toughest alternative grip material available today,
while still retaining the pristine look of real ivory or stag. It is
rock-solid, stable, and water, chemical, and oil resistant. It is
flame and heat resistant, and is entirely void-free, with over 10x the
strength, durability, and impact resistance of alternative materials. Unlike
with real ivory or stag, there is no routine care and maintenance involved,
with no danger of it drying out and cracking if not maintained properly or if
left in the heat. It is filled with premium natural compounds to
produce outstanding aesthetic properties and mechanical
performance. When aged with our natural aging process, it takes on
the equivalent of a 100-year-old patina, with subtle grain details which many
experts cannot tell apart from the real thing. In addition, the
material has a fine grain structure, which holds intricate detail for carvings,
artistic relief work, etc., found on many historic grips.
08292000
Please note that the photo used is a stock photo (a sample
pair). Yours will appear similar to these. While
we make every effort to render the pictures as close to the actual product as
possible, there may be slight variations in the hue of the product due to
monitor settings, camera lighting, etc.
Grip screw included with all grips.
Custom satisfaction is important to us. Full money back, less shipping, if not completely satisfied.
Thank you!!
Listed with ExportYourStore.com