UBERTI MAGNA-TUSK 2P BLACK IVORY GRIPS Cattleman Evil Roy El Patron Smoke Wagon
UBERTI MAGNA-TUSK 2P BLACK IVORY GRIPS Cattleman Evil Roy El Patron Smoke Wagon
Arizona Custom Grips
UBERTI SAA
(SINGLE ACTION ARMY REVOLVERS)
~ Exclusive ~
MAGNA-TUSK
black ivory grips
Milled out of a solid block of Magna-Tusk, denser and
heavier than regular Ivory or Stag. See
below for details.
~~~~~
two-PIECE
(with SCREWHOLE) STYLE
THIS AUCTION IS FOR THE TWO-PIECE (SCREWHOLE) STYLE.
Note: ANY of
our grips, whether ONE-PIECE OR TWO PIECE style, will interchange and
work on either style of grip frame.
We include, free of charge, a conversion kit
which allows these two-piece grips to mount onto a one-piece style grip frame
(without a grip pin). Our conversion kit replaces the need for a
grip pin and is actually a stronger design, and locks the grips up tight
against the frame, allowing no movement.
This
gives you the advantage of the ease of maintenance of two-piece grips, while
preserving the integrity of your revolver in original factory condition.
Grip screw, conversion kit, and
full illustrated instructions are included with each set of grips.
10292000
~~~~~
WHAT
THESE WILL FIT – Please read this in its entirety:
This auction is
for a set of Genuine Magna-Tusk™ Ivory grips for any of the UBERTI Model 1873 SAA (Single Action
Army) style revolvers, with the standard sized “plowhandle” grip shape.
These will be
marked “Uberti,” and may also (but not necessarily) be marked by the U.S.
importer, such as “Cimarron,” “Taylors & Co.”, “Navy Arms”, or “EMF”,
etc.
This includes any
of the following:
● Cimarron
revolvers: Cattleman; Cattleman
II; Rooster Shooter; El Patron; Evil Roy; Uberti Pistoleer; Cimarron Model P; Hombre; Cimarron New Sheriff;
Uberti US 7th Cavalry; U.S.V.
Artillery, and Cavalry Scout; Holy Smoker; Wyatt Earp Buntline; Chisholm;
Cody; Desperado; Frisco; Old West; Stallion; Buntline; Horseman; SASS Pro; CMS Pro; Model
P Jr.;
● Taylor’s
& Co.: Smoke Wagon; Cattleman; Gambler; Cattleman 12-Shot; Runnin’
Iron; Taylor Marshall; Drifter; Devil Anse; Old Randall; and
Ranch Hand;
● Also: Any of Stoeger’s Uberti
revolvers, E.M.F. Dakota II or Dakota III; American Arms Regulator; or any Uberti SAA style revolver with the
standard sized grip frame, or Uberti revolver from any other importer, even
without a specific name or designation.
If you have a standard SAA style revolver marked Uberti, these will fit.
*PLEASE NOTE : if you believe you have a Uberti
revolver made prior to 2010, please contact us after your purchase so we can
get further details from you, so we can make sure you get the correct grip.
What these WILL NOT FIT:
1. Please note that these grips will NOT fit other makes of revolvers,
such as revolvers made by Pietta, Armi San Marco, Colt, Ruger, etc. Also, these grips will NOT fit the Bisley, the Birdshead, the Thunderer or the Lightning
style revolvers, which use a completely different shaped grip frame. We do make grips for all of these which you
can find in our store, so please email if you have any questions.
2. In addition, these grips are made for standard sized grip frames only and WILL NOT FIT grip frames which are around 3-3/8” tall. To make sure you are ordering the correct
grip, please check your grip frame measurement prior to ordering. Your grips
or grip frame should measure somewhere between 3-1/16 – 3-1/8” tall, depending on how you hold your ruler,
tape, or caliper. Taylor & Co.’s Gunfighter,
Taylor’s Cattleman 44 Mag., Cimarron Bad Boy, the El Patron Grizzly Paw, and the Uberti Callahan, for example, have the taller 3-3/8” grip frame. If you have one of these, our Uberti 1860
Army Conversion & Metallic Cartridge revolver grips will work for these. Please contact us if you cannot find what you
need, or if you have any questions. We
are always happy to help.
10232100
A note on
the Italian-produced Revolvers:
The
Italian firms, located in Northern Italy, have been making SAA style revolvers
now for well over a half century, and have made a huge number of makes and
models and grip frame profiles with varying configurations over the years. We have an in-depth knowledge of the
differing grip configurations, have a large library of gripframe variations
from the various makers both old and new, and have vast experience making grips
for Uberti, Pietta, Armi San Marco, and the other Italian gunmaking firms. Our experienced makers go to great lengths
to ensure an exacting fit, including utilizing modern precision CNC production
techniques, as well as incorporating old-time hand tuning and hand checking the
fit of every grip on our reference frames prior to leaving our factory. We have a long list of many satisfied
customers in the shooting industry who have purchased grips to use in a wide
variety of applications, and we can safely and confidently guarantee proper fit
and finish to your complete satisfaction.
For an
additional charge, custom fitting is an option.
Please contact us for further details if you are interested in custom
fitting.
10232100
Arizona Custom Grips
About our exclusive Magna-Tusk™ “Hi-Grade” Ivory Grips:
Magna-Tusk™ Ivory grips, an exclusive of Arizona
Custom Grips, are manufactured out of our super high-grade, ultra-high
density Ivory material developed exclusively for our premium grip
production. Vastly superior to standard
bonded ivory found on factory and other aftermarket Ivory grips, Magna-Tusk™ is
capable of withstanding the heaviest recoil and impact, and is the toughest
alternative ivory material available today, while still retaining the pristine
look of real ivory. It is completely
rock-solid, stable, and water, chemical, and oil resistant. It is flame and heat resistant, and is entirely
void-free, with over 10x the strength, durability, and impact resistance of
alternative materials. Unlike with real
ivory, there is no routine care and maintenance involved, with no danger of it
drying out and cracking if not maintained properly or if left in the heat. It is filled with premium natural and
synthetic compounds to produce outstanding aesthetic properties and mechanical
performance. When aged with our exclusive
aging process, it takes on the equivalent of a 100-year-old patina, with subtle
grain details which many experts cannot tell apart from the real thing. In addition, the material has a fine grain
structure, which holds intricate detail for carvings, imitation stag, etc.,
found on many historic grips.
Grip screw included with all grips.
The photo used is a stock photo (a sample pair) as
we carry an assortment of this style grip. Yours will appear similar to
these.
Customer
satisfaction is important to us -- your complete satisfaction is guaranteed!
Listed with ExportYourStore.com