UBERTI SAA B-WESTERN GRIPS ~ SINGLE ACTION ARMY ~ Cattleman El Patron Evil Roy

Arizona Custom Grips

UBERTI SAA

1873 SINGLE ACTION ARMY STYLE REVOLVERS

~ Exclusive
~

  MAGNA-TUSK™

B-Western Style Custom Stag Grips

~~~~~

two-PIECE
(with SCREWHOLE) STYLE

THIS AUCTION IS FOR THE TWO-PIECE (SCREWHOLE) STYLE.

Note: ANY of
our grips, whether ONE-PIECE OR TWO PIECE style, will interchange and
work on either style of grip frame. 

We include, free of charge, a conversion kit
which allows these two-piece grips to mount onto a one-piece style grip frame
(without a grip pin).  Our conversion kit replaces the need for a
grip pin and is actually a stronger design, and locks the grips up tight
against the frame, allowing no movement. 
This
gives you the advantage of the ease of maintenance of two-piece grips, while
preserving the integrity of your revolver in original factory condition. 

Grip screw, conversion kit, and
full illustrated instructions are included with each set of grips.  

10292000

~~~~~

WHAT THESE WILL FIT (Please read this through in its
entirety):

These Grips WILL FIT: 

* ANY of the standard sized UBERTI 1873 Single Action Army
“plowhandle” style revolvers.  Uberti’s
standard sized grips will measure
somewhere between 3-1/16 – 3-1/8” tall, depending on how you hold your
ruler, tape, or caliper. 

These will be
marked “Uberti,” and may also (but not necessarily) be marked by the U.S. importer,
such as “Cimarron,” “Taylors & Co.”, “Navy Arms”, or “EMF”, etc. 

In addition to
fitting any of the standard UBERTI SAA style revolvers, these grips will fit (i.e.,
incorporate the additional milling and fitting) for any of the following Uberti
SAA revolvers:

* Cimarron / Uberti Cattleman,
1873 Cattleman
II, Cimarron Model P, Evil Roy, El Patron, Hombre*,
American Arms Regulator*, Cimarron New Sheriff, Uberti US 7^th Cavalry, U.S.V. Artillery, and Cavalry Scout, Pistoleer, Holy Smoker, Wyatt Earp Buntline, Rooster Shooter, Chisholm, Cody, Desperado, Frisco, Old West, Stallion, Buntline, Horseman, SASS Pro, CMS Pro, E.M.F. Dakota II*
or Dakota III*;

* Also:  Taylor’s & Co.  Smoke
Wagon, Cattleman, Gambler, Cattleman 12-Shot, Runnin’
Iron, Taylor Marshall, Drifter, Devil Anse, Old Randall*,
and Ranch Hand*;

* Also: Any
of Stoeger’s Uberti revolvers, or any Uberti SAA style revolver with the
standard sized grip frame, or Uberti revolver from any other importer, even
without a specific name or designation. 
If you have a standard SAA style revolver marked Uberti, these will fit.

*PLEASE NOTE: if you have a BRASS
gripframe (such as found on the Hombre,
the Regulator, the Dakota II or III, Old Randall, or Ranch Hand
revolvers), you MUST contact us
prior to ordering and let us know what you have, as these grips may require additional
specifications, profiling, and machining cuts. 

What these WILL NOT FIT: 

1.  Please note that these grips are made to fit ONLY the Uberti Model 1873 style Single Action revolvers, with the
typical “plowhandle” shaped gripframe, and will NOT fit other makes of revolvers (such as Pietta, Armi San
Marco, Colt, Ruger, etc.).  These grips will
also NOT fit the Bisley, the
Birdshead, the Thunderer or the Lightning style revolvers, from ANY maker, which
use a completely different shaped grip frame. 
Please email if you have any questions.

2.  In addition, these WILL NOT FIT grip frames which are around 3-3/8” tall.  To make sure you are ordering the correct
grip, please check your grip frame measurement prior to ordering.  Your grips
or grip frame should measure somewhere between 3-1/16 – 3-1/8” tall, depending on how you hold your ruler,
tape, or caliper.  The important thing is
to make sure they are NOT around 3-3/8” tall. 
Taylor & Co.’s Gunfighter, Cimarron Bad Boy,
the El Patron Grizzly Paw, and the
Uberti Callahan, for example, have
the taller 3-3/8” grip frame.   If you have one of these, any of our Uberti
1860 Army Conversion & Metallic Cartridge revolver grips are milled to work
for these, as well as the Conversions. 

Please send us an
email and tell us your specific model if you cannot locate what you need, or if
you have any questions.  We are always
happy to help.

A note on
the Italian-produced Revolvers:

The
Italian firms, located in Northern Italy, have been making SAA style revolvers
now for well over a half century, and have made a huge number of makes and
models and grip frame profiles with varying configurations over the years.  We have an in-depth knowledge of the
differing grip configurations, have a large library of gripframe variations
from the various makers both old and new, and have vast experience making grips
for Uberti, Pietta, Armi San Marco, and the other Italian gunmaking firms.   Our experienced makers go to great lengths
to ensure an exacting fit, including utilizing modern precision CNC production
techniques, as well as incorporating old-time hand tuning and hand checking the
fit of every grip on our reference frames prior to leaving our factory.  We have a long list of many satisfied
customers in the shooting industry who have purchased grips to use in a wide
variety of applications, and we can safely and confidently guarantee proper fit
and finish to your complete satisfaction.

For an additional
charge, custom fitting is an option. 
Please contact us for further details if you are interested in custom
fitting.

01122100

Arizona Custom Grips

Handcrafted on an individual Custom basis out
of Magna-Tusk™, our solid, dense proprietary substrate which is formulated out
of natural materials for an authentic look and feel, and which yields a
finished product which is the ultimate rendition of the classic stag grips of
the golden era of Westerns.   Better
materials and our proprietary pigmenting process yields a finished product better
than the originals.  These grips are
milled from a solid slab and are not cast. 
This avoids the inclusions, air pockets, and most importantly the cheap
"cast plastic" look found in the urethane and other imitation
materials commonly available.  Like natural
grips, with use and handling over time they will form an authentic patina and
will only improve with age.  They look
better, age better, and perform better. 
And perhaps best of all, these grips are made entirely in the U.S.A.!

Gun prop and
holster not included -- only the grips are for sale. Please note that the grips
shown are a stock photo used for illustration purposes only.  Your grips will be individually hand cut and
appear similar to these.

The
"B-Western":

These
"B-Western" Style Custom grips are hand-carved one-at-a-time in recognition
of one of America's most outstanding and lasting cultural achievements of the
20th century -- the "B-Western." Styled after the grips seen on the
revolvers of classic Hollywood Westerns of the 1930's to the 1960's (the
"golden era of Hollywood Westerns"), these grips were featured in
numerous Western productions both on Television and on the Silver Screen.
Gunsmoke, Bonanza, The Rifleman, Rawhide, The Virginian, and many others too
numerous to mention, all took America back to a simpler time and place. Times
have changed, but the lessons and values of that unforgettable period still
have a place in the hearts of millions of Americans and many other Western fans
throughout the world who appreciate the enduring contribution to our culture
and society made by the unique and colorful characters of the Old West.

4.18.13

Arizona Custom Stag™ Grips:

These grips
are completely unique, custom, and one-of-a-kind. Each is hand cut, and no two
are the same.  You will not find another
set like them on any gun at any Western event, guaranteed! Hand made in
painstaking, exacting detail to authentic feel and dimensions. We strive for
museum quality with every pair. 

Arizona
Custom Stag™  looks, feels, and ages like the genuine
product, with durability far exceeding Ivory (Ivory is a relatively fragile
material, which often cracks under stress and age).  Magna-Tusk™, our Premier Grade product used
in these grips, is filled with natural materials, and works and polishes as well
as looks like the real thing. It takes carving with superior detail and
definition, and accurately captures that authentic, weathered, deep, dark
chocolate brown/black color in the bark pattern sought after by stag
collectors. With age, it develops a soft, mellow patina which makes it indistinguishable
from the more expensive and fragile product.

These grips
are used in professional applications where only the best will do.  We have supplied these grips to Hollywood and
other locations that demand only the best in durability, design, and authenticity.  We cut no corners, and make every grip with
the intention of it being a grip which will last a lifetime.  A fine revolver deserves a fine grip.  If you have been looking for the ultimate
B-Western grip, you won't be disappointed!!

The durability
and excellent aging characteristics of these grips are enhanced by our
exclusive and permanent bonded pigment application process which, once cured,
won't chip, crack, or peel like superficially applied paint products found on
less expensive grips.  Accept no
substitutes.  Arizona
Custom Stag™ adds
a touch of class and realism which is completely lost by using lesser quality
"cast plastic" imitations available elsewhere.

Grip screws
included with all grips.  As with all
Single Action grips, minor fitting may be, but is not usually, required due to
small variations in grip frames.  Full
instructions included with all grips.

The
distinctive qualities and authentic presentation of Arizona
Custom Stag™  offers an authentic look, heft and feel which
invoke the aura and spirit of the Old West. 
Guaranteed to please even the most discriminating collector and Western
memorabilia aficionado. Full money back, less shipping, if not fully satisfied!
If returning, please note that the product must be returned in original,
unaltered condition.

Remember, above all:
Ride Hard, Shoot Straight, and Speak the Truth! Happy Trails!!

5.1.13