UBERTI SAA GRIPS Cattleman, Evil Roy -- Magna Tusk 1P WHITE MEXICAN EAGLE, qr

Arizona Custom Grips

UBERTI SAA

(1873 SINGLE ACTION ARMY STYLE REVOLVERS)

~ Exclusive ~

  MAGNA-TUSK™

white mexican eagle GRIPS

Milled out of a solid block of Magna-Tusk, denser and heavier than regular Ivory or Stag.  See below for details.

~~~~~

oNE-PIECE (nO SCREWHOLE) STYLE grips

THIS LISTING IS FOR OUR ONE-PIECE (NO SCREWHOLE) STYLE GRIPS

********

ONE-PIECE VS. TWO-PIECE STYLE GRIPS EXPLAINED:

Note: One-Piece style grips do not have a visible screw but instead use an internal spacer to mount the grips.  Two-Piece style grips incorporate a visible screw, allowing easy and quick removal for cleaning or maintenance of your revolver.  We manufacture both types.  Both styles of our grips will interchange and work on either style of grip frame, no matter how your revolver is currently set up.  Both styles are traditional and historical designs and both were originally used on early Colts, so whichever style you choose is really a matter of personal preference. 

One-Piece style grips (i.e., grips with no visible screwhole in the grips) incorporate a spacer (included with the grips) which is user mounted to the inside of the grip panels to hold them in place instead of a using a screw.  To ensure optimum fit and best performance, the spacer is sent unmounted since all gripframes vary slightly in inside dimensions.  Installation is simple and generally takes only a few minutes.  Illustrated instructions included with each order.  This results in a rock-tight fit, without the need of a screw.  One-Piece grips are preferred by many collectors for their clean lines and traditional look, and are seen on many early Colts. Once mounted, they are fully removable by removing the three backstrap screws, and will not alter your revolver in any way.  Reinstallation is in reverse order. 

Alternatively, our Two-Piece style grips (i.e., grips with a visible screw) offer the superior convenience of quick grip removal using only the screw (also included with the grips).  Our Two-Piece style grips also include our proprietary Conversion Kit, allowing their use on revolvers that do not have a grip pin in the frame (as is the case with most Italian-made revolvers and others that currently have a one-piece style grip).  The Conversion Kit replaces the need for a grip pin and is actually a stronger design, and allows the grips to lock up tight on the frame, allowing no movement.  This requires no modification to your revolver.  Two-piece grips give you the advantage of easier access to your revolver for cleaning and maintenance, while preserving the integrity of your revolver in original factory condition. Two-Piece style grips were also used on many of the early Colts, and are a traditional and iconic historical design, offering a distinctive look and convenience preferred by many shooters and collectors.

Fully illustrated, easy-to-follow mounting instructions are included with every order. 

[R.23122871]

~~~~~

WHAT THESE WILL FIT

(Please read this entire section carefully, including the “VARIATIONS” section and the “WILL NOT FIT” section below!):

These WILL FIT any of the UBERTI Single Action Army style revolvers, with the standard sized SAA “plowhandle” grip frame, which measures around 3-1/16” to 3-1/8” tall, depending on how you hold your ruler, tape, or caliper.

This includes (but is not necessarily limited to) any of the following, all of which are made by Uberti and imported by Cimarron, E.M.F., Taylor’s & Co., Stoeger, etc:

●  Cimarron Uberti revolvers:  Buntline; Cattleman; Cattleman II; Chisholm; Desperado; El Patron; Evil Roy; Frisco; Holy Smoker; Hombre; Horseman; Cimarron Model P and Model P Jr.; New Sheriff; Old West; Pistoleer; Rooster Shooter; Short Stroke CMS Pro; Short Stroke SASS Pro; Thunderstorm and Thunderstorm CM; US Military Models (Custer 7^th Cavalry,  U.S. Cavalry Scout, and U.S.V. Artillery); Wyatt Earp Buntline, and Wyatt Earp Cody;

●  Taylor’s & Co. Uberti revolvers:  Cattleman (NOTE: these will NOT fit the Cattleman .44 Mag which uses the larger 3-3/8” gripframe – see below); Cattleman 12-Shot; Cattleman Antique; Cattleman Antique Engraved;  Cattleman Buntline; Cattleman Old Model; Cattleman White Engraved Tuned; Devil Anse; Drifter; Gambler ; Marshall ; Old Randall; Ranch Hand; Runnin Iron; Short Stroke Runnin Iron ; Smokewagon; Smokewagon Short Stroke .  

(NOTE: these grips will NOT fit the Taylor’s Gunfighter or Gunfighter Defender, both of which use the larger 3-3/8” gripframe – see below);

●  Will also fit Stoeger’s Uberti 1873 SAA revolvers; the E.M.F. Dakota II or Dakota III; the American Arms Regulator;  

●  OR ANY OTHER UBERTI SAA STYLE REVOLVER WITH THE STANDARD SIZED (3-1/16” TO 3-1/8” TALL) “PLOWHANDLE” STYLE GRIP FRAME.

UBERTI GRIPFRAME VARIATIONS -- IMPORTANT!

Over the years Uberti has used multiple variations of gripframes on their SAA style revolvers, and each features a slightly different profile (outer perimeter) not easily visible by sight.  Grips will not interchange between profiles, so we make grips for each of these variants. 

In order for us to ensure that you get the proper grips, 1): please add a note to your order with the DATE CODE you see on your revolver (please see the second picture in the listing showing what to look for), and 2): also let us know if you have a STEEL OR BRASS GRIPFRAME.  If your gripframe is Nickel plated, you will be able to tell using a magnet.

If after a careful inspection under good light you cannot find a date code (some of the newer revolvers have it stamped on the mainframe hidden underneath the triggerguard and is not visible without removing it), please let us know and also send us the serial number for proper identification.

Please note that if we do not hear from you, we will send the most common, current grip profile in order to get the grips out on time.

What these WILL NOT FIT: 

PLEASE DOUBLE CHECK YOUR FRAME HEIGHT:  As mentioned above these grips will only fit Uberti revolvers having the standard sized SAA style gripframe (around 3-1/16” to 3-1/8” tall depending on how you hold your ruler, tape, or caliper). 

These WILL NOT fit Uberti gripframes that are around 3-3/8” tall (such as Taylor & Co.’s Gunfighter or Gunfighter Defender, Taylor’s Cattleman 44 Mag., Cimarron’s Bad Boy, the El Patron Grizzly Paw, the Uberti Callahan, etc).  Please double check your revolver carefully before ordering.  The height difference is easily visible and obvious if you are familiar with Single Action revolvers.  If you have one of these taller frames, our Uberti 1860 Army “Conversion & Metallic Cartridge” grips will fit these revolvers.  You can locate these in our store (or please email if you cannot find what you need). 

.22 Stallion Revolvers:  Please note that these will NOT fit the .22 Caliber Uberti “Stallion” revolvers, which use a smaller grip.  Please contact us if you have a .22 Stallion so we can supply the proper grips.

ALL OTHER Non-Uberti revolvers and non-“plowhandle” grip shapes:  These WILL NOT FIT any revolvers from other makers (such as Pietta, Armi San Marco, Colt, Ruger, etc.).  Also, these will NOT fit revolvers using a gripframe that is NOT the standard “plowhandle” shape, such as the Bisley, the Birdshead, the Thunderer, Thunderball, or the Lightning style gripframes, nor any of the Remington style revolvers such as the 1858, 1875, or 1890.  These all use an entirely different gripframe shape.  Please take a careful look at the shape of your gripframe.  These are for the standard “plowhandle” style revolvers only.

[R.26020400]

A note on the Italian-produced Revolvers:

The Italian firms, located in Northern Italy, have been making SAA style revolvers now for well over a half century, and have made a huge number of makes and models and grip frame profiles with varying configurations over the years.  We have an in-depth knowledge of the differing grip configurations, have a large library of gripframe variations from the various makers both old and new, and have vast experience making grips for Uberti, Pietta, Armi San Marco, and the other Italian gunmaking firms.   Our experienced makers go to great lengths to ensure an exacting fit, including utilizing modern precision CNC production techniques, as well as incorporating old-time hand tuning and hand checking the fit of every grip on our reference frames prior to leaving our factory.  We have a long list of many satisfied customers in the shooting industry who have purchased grips to use in a wide variety of applications, and we can safely and confidently guarantee proper fit and finish to your complete satisfaction.

For an additional charge, custom fitting is an option.  Please contact us for further details if you are interested in custom fitting.

[R.07132300]

Arizona Custom Grips

About Magna-Tusk™ Ivory and Stag Grips:

 Magna-Tusk™ Ivory and Stag grips, a product of Arizona Custom Grips, are manufactured out of our high-grade, high density ivory material designed exclusively as a premium, high-strength grip material.  Vastly superior to standard bonded ivory or stag found on most factory and other aftermarket grips, Magna-Tusk™ is capable of withstanding the heaviest recoil and impact, and is the toughest alternative grip material available today, while still retaining the pristine look of real ivory or stag.  It is rock-solid, stable, and water, chemical, and oil resistant.  It is flame and heat resistant, and is entirely void-free, with over 10x the strength, durability, and impact resistance of alternative materials.  Unlike with real ivory or stag, there is no routine care and maintenance involved, with no danger of it drying out and cracking if not maintained properly or if left in the heat.  It is filled with premium natural compounds to produce outstanding aesthetic properties and mechanical performance.  When aged with our natural aging process, it takes on the equivalent of a 100-year-old patina, with subtle grain details which many experts cannot tell apart from the real thing.  In addition, the material has a fine grain structure, which holds intricate detail for carvings, artistic relief work, etc., found on many historic grips.  

Rev 08292000

Please note that the photo used is a stock photo (a sample pair).  While we make every effort to render the pictures as close to the actual product as possible, there may be color variations due to the unique aging process of each piece, and there may be slight variations in the hue of the product photo due to monitor settings, camera lighting, etc.

Customer satisfaction is important to us – full money back, less shipping, if not fully satisfied!!