UBERTI SAA JOHN WAYNE MAGNA-TUSK™ SINGLE ACTION ARMY GRIPS ~ Cattleman, etc. QR

Arizona Custom Grips

UBERTI SAA

1873 SINGLE ACTION ARMY STYLE REVOLVERS

~ Exclusive
~

  MAGNA-TUSK™

JOHN WAYNE FINGERGROOVE STYLE

Aged IVORY GRIPS

(QR Coded)

Hand cut in the
famous John Wayne Fingergroove style featured in many of his most famous
Westerns, such as True Grit, The War Wagon, The Cowboys, and Rooster Cogburn.  These grips are made out of our exclusive
Magna-Tusk™ Ivory, then aged to perfection -- the highest quality grips of
their type ever available.   An exclusive
of Arizona Custom Grips. 

Note:
All of our two-piece grips (which come with a screw) will work on Uberti’s
One-Piece gripframes.  A Conversion Kit
is included with each set of grips.  See
Below for further details.

What
these will fit:

This auction is
for a set of Genuine Aged Magna-Tusk ™ Ivory grips for any of the standard UBERTI Model 1873 Single Action Army
“plowhandle” style SAA revolvers. 

This includes any
of the 1873 Single Action Cattleman series, the Rooster Shooter, 1873 Cattleman II, El Patron, Evil
Roy, Stallion, Buntline, Cattleman .22, Horseman, El Malo, SASS Pro, CMS Pro, Taylor’s
Smoke Wagon, Taylor’s Cattleman, or any of the other standard Uberti “plowhandle”
style pistols, including anything sold by Cimarron, Taylors, Navy Arms, EMF, or
any of the other importers. 

To make sure you
are ordering the correct grip, please check your grip frame measurement prior
to ordering.  Your
grips or grip frame should measure somewhere between 3-1/16 – 3-1/8” tall, depending on how you hold your ruler,
tape, or caliper.  The important thing is
to make sure they are not around 3-1/2” tall, which requires a different grip.  Please contact us if your grip is taller than
3-1/8” so we can get you the proper grip.

What these will NOT fit:  Please note that these grips are
made to fit only the Uberti Model 1873 style Single Action revolvers, with the
typical “plowhandle” shaped gripframe. 
They will NOT fit the Bisley, the Birdshead, the Thunderer or the
Lightning style revolvers, which use a completely different shaped
gripframe. 

A note on
Uberti Revolvers:

The
Uberti firm has been making SAA style revolvers now for well over a half
century, and has made numerous makes and models and grip frame profiles with
varying configurations over the years. 
We have an in-depth knowledge of the differing grip configurations, have
a large library of gripframe variations from the various makers both old and
new, and have vast experience making grips for Uberti, Pietta, as well as the
other Italian gunmaking firms.   Our
experienced makers go to great lengths to ensure an exacting fit, including
utilizing modern precision CNC production techniques, as well as incorporating
old-time hand tuning and hand checking the fit of every grip on our reference
frames prior to leaving our factory.  We
have a long list of many satisfied customers in the shooting industry who have
purchased grips to use in a wide variety of applications, and we can safely and
confidently guarantee proper fit and finish to your complete satisfaction.

For an
additional charge, custom fitting is an option. 
Please contact us for further details if you are interested in custom
fitting.

Note:
Two-Piece vs. One-Piece Grips:

ALL OF OUR TWO-PIECE GRIPS WILL WORK ON ONE-PIECE GRIP FRAMES

We include, free of
charge, a conversion kit which allows these two-piece grips to mount onto a
one-piece style grip frame (without a grip pin).  Our conversion kit
replaces the need for a grip pin and is actually a stronger design, and locks
the grips up tight against the frame, allowing no movement.  This
gives you the advantage of the ease of maintenance of two-piece grips, while
preserving the integrity of your revolver in original factory condition.  Easy installation
instructions included.

031420

Arizona Custom Grips

About our exclusive Magna-Tusk™ “Hi-Grade”
Ivory and Stag Grips:

Magna-Tusk™ Ivory and Stag grips, an
exclusive of Arizona Custom Grips, are manufactured out of our
super high-grade, ultra-high density material developed exclusively for our
premium grip production.  Vastly superior to standard bonded ivory or
stag found on factory and other aftermarket grips, Magna-Tusk™ is capable of
withstanding the heaviest recoil and impact, and is the toughest alternative grip
material available today, while still retaining the pristine look of real ivory
or stag.  It is completely rock-solid, stable, and water, chemical,
and oil resistant.  It is flame and heat resistant, and is entirely
void-free, with over 10x the strength, durability, and impact resistance of
alternative materials.  Unlike with real ivory or stag, there is no
routine care and maintenance involved, with no danger of it drying out and
cracking if not maintained properly or if left in the heat.  It is
filled with premium natural and synthetic compounds to produce outstanding
aesthetic properties and mechanical performance.  When aged with our
exclusive aging process, it takes on the equivalent of a 100-year-old patina,
with subtle grain details which many experts cannot tell apart from the real
thing.  In addition, the material has a fine grain structure, which
holds intricate detail for carvings, artistic relief work, etc., found on many
historic grips. 

About Our Aging Process:

Unlike
the lightweight artificial yellow plastic materials sometimes offered for sale,
Magna-Tusk aged grips start out as a solid block of white virgin Magna-Tusk
Ivory.  Grip blanks are then milled from
this premium material, incorporating both CNC techniques for blanking and
finishing techniques similar to those used in manufacturing the originals.  They are then carefully aged with our
exclusive aging process, incorporating concentrated UV light (the essential
aging property in natural sunlight). 

Our process produces an authentic appearance and genuine patina
which extends into the surface, just like real ivory or stag.  Not only does this
give it the appearance of authenticity and depth, but this surface will not
chip, crack, or peel like a superficially applied coating.  Accept no substitutes.  With Magna-Tusk aged grips, most experts cannot tell them apart
from a decades-old or even a centuries-old original.  While the quality difference is somewhat
noticeable in the photos, the difference is even more apparent when seen and
handled in person.  Many of our repeat
sales are made by the very customers we sell to, who take their custom-stocked
revolvers to the range or club, where the quality difference is immediately
seen and appreciated by fellow shooters.

Magna-Tusk grips have all the authenticity of the originals, with
several improvements over original materials including increased durability,
and are made to last a lifetime.  They
feature subtle but authentic color mottling, grain variegation, and other
authentic minute details found on original old Ivory and aged Stag, as seen on
many of the revolvers which belonged to gunfighters and lawmen of the Old
West.  Dense, heavy, and solid, Magna-Tusk grips are in a class all their
own. With our exclusive aging process, these grips
are outstanding right out of the box, and will continue to improve over
time.  The more these grips are handled
and used, the better they look!

030120

Grip screw included
with all grips. 

The photo used is a stock photo (a sample
pair).  Yours will appear similar to these. 

Customer
satisfaction is important to us – we guarantee your complete satisfaction with
every purchase!!