Arizona Custom Grips
UBERTI SAA MAGNA-TUSK™ GRIPS Cattleman, Evil Roy, El Patron ~ 1P WHITE IVORY
UBERTI SAA MAGNA-TUSK™ GRIPS Cattleman, Evil Roy, El Patron ~ 1P WHITE IVORY
Couldn't load pickup availability
Arizona Custom Grips
UBERTI SAA
(1873 SINGLE ACTION ARMY STYLE REVOLVERS)
~ Exclusive ~
MAGNA-TUSK™
WHITE IVORY GRIPS
Milled out of a solid block of Magna-Tusk,
denser and heavier than regular Ivory or Stag.
See below for details.
~~~~~
“nO SCREWHOLE” STYLE grips
THIS LISTING IS FOR OUR “NO
SCREWHOLE” STYLE GRIPS
********
“NO SCREWHOLE” VS. “SCREWHOLE & SCREW” GRIP DIFFERENCES EXPLAINED:
Note: “SCREWHOLE
& SCREW” style grips incorporate a visible screw, allowing easy and quick
removal for cleaning or maintenance of your revolver. “NO SCREWHOLE” style grips do not have a
visible screw but instead use an internal spacer to mount the grips. We manufacture both types. Both styles of our grips
will interchange and work on your existing grip frame, no matter how your
revolver is currently set up. For
example, the “SCREWHOLE” style will work on your gripframe even if it came with
“NO SCREWHOLE” style grips on it. See below for more details.
Helpful tip: Unless you are looking for the
particular look of a “No Screwhole” grip, the “SCREWHOLE & SCREW”
style grips are usually preferred by most users because they are quicker and easier
to remove for cleaning and maintaining your revolver. Both styles of grips are historically
correct, but the ones with the screw were made in larger numbers because of the
added convenience.
Both styles are
traditional and historical designs and both were originally used on early
Colts, so whichever style you choose is really a matter of personal preference.
Our “SCREWHOLE & SCREW”
style grips (i.e., grips with a visible screwhole and screw) is a traditional
design and offers the superior convenience of quick grip removal using only a
single screw (included with the grips).
If your revolver is currently set
up for “No Screw” style grips and does not have a grip pin (as is the case with most Italian-made
revolvers), these grips will include our
proprietary Conversion Kit at no
extra cost, allowing their use on these revolvers. The Conversion Kit replaces the need for a
grip pin and is actually a stronger design, and allows the grips to lock up
tight on the frame, allowing no movement, and requiring no modification to the revolver itself.
“Screwhole” style grips give you the
advantage of easier removal for cleaning and maintenance, while preserving the
integrity of your revolver in original factory condition. This style was used on the
majority of the early Colts, and is a traditional and iconic historical design,
offering a distinctive look and convenience preferred by many shooters and collectors.
“NO
SCREWHOLE” style grips (i.e., grips with no visible screwhole in the grips)
incorporate a spacer (included with the grips) which is user mounted to the inside
of the grip panels to hold them in place instead of a using a screw. This design results in a rock-tight fit,
without the need of a visible screw.
Note: To ensure optimum fit and best performance with this style grip, the
spacer is sent unmounted since all gripframes vary slightly in inside
dimensions. Installation is simple and generally
takes only a few minutes. Illustrated
instructions included with each order. “NO
SCREWHOLE” style grips are preferred by some collectors for their clean lines,
and are also seen on many early Colts. Once
mounted, they are fully removable by removing the three backstrap screws and
pulling off the backstrap, as with any other traditional similar style grip.
Fully
illustrated, easy-to-follow mounting instructions are included with every order.
[R.Z261101C]
~~~~~
WHAT THESE WILL FIT
(Please read this entire section carefully, including the “VARIATIONS”
section and the “WILL NOT FIT” section below!):
These WILL FIT any of the UBERTI Single Action Army style revolvers, with the standard sized SAA “plowhandle”
grip frame, which measures around 3-1/16”
to 3-1/8” tall, depending on how you hold your ruler, tape, or caliper.
This includes (but is not necessarily limited to) any of the following,
all of which are made by Uberti and imported by Cimarron, E.M.F., Taylor’s
& Co., Stoeger, etc:
● Cimarron Uberti revolvers: Arizona
Ranger; Buntline; Cattleman; Cattleman II; Chisholm; Desperado; El Patron; Evil
Roy; Frisco; Holy Smoker; Hombre; Horseman; Cimarron Model P and Model P Jr.; New Sheriff; Old West; Pistoleer; Rooster Shooter; Short Stroke CMS Pro; Short Stroke SASS Pro; Thunderstorm
and Thunderstorm CM; US Military Models (Custer 7th
Cavalry, U.S. Cavalry Scout, and U.S.V. Artillery); Wyatt Earp Buntline, and Wyatt
Earp Cody;
● Taylor’s & Co. Uberti
revolvers: Cattleman (NOTE: these will
NOT fit the Cattleman .44 Mag which uses the larger 3-3/8” gripframe – see
below); Cattleman 12-Shot; Cattleman Antique; Cattleman Antique Engraved; Cattleman Buntline; Cattleman Old Model; Cattleman
White Engraved Tuned; Devil Anse;
Drifter; Gambler ; Marshall ; Old Randall; Ranch Hand; Runnin Iron; Short Stroke Runnin Iron ; Smokewagon; Smokewagon Short Stroke . (NOTE: these grips will NOT fit the Taylor’s
Gunfighter or Gunfighter Defender, both of which use the larger 3-3/8”
gripframe – see below);
● WILL ALSO FIT: Stoeger’s Uberti 1873 SAA revolvers; the
E.M.F. Dakota II or Dakota III; the American Arms Regulator;
● OR ANY OTHER UBERTI SAA STYLE
REVOLVER WITH THE STANDARD SIZED (3-1/16” TO 3-1/8” TALL) “PLOWHANDLE” STYLE
GRIP FRAME.
UBERTI GRIPFRAME VARIATIONS --
IMPORTANT!
Over the years Uberti has used multiple
variations of gripframes on their SAA style revolvers, and each features slight
variations.
In order for us to ensure that you get
the proper grips:
1): Please add a note to your order with
the DATE CODE you see
on your revolver (please see the second picture in the listing showing what to
look for), and
2): Let us know if you have a STEEL OR BRASS GRIPFRAME. (Note: If your gripframe is plated with Nickel,
Cerakote, etc., you will be able to tell using a magnet).
If after a careful inspection under good
light you cannot find a date code (some of the newer revolvers have it stamped
on the mainframe hidden underneath the triggerguard and is not visible without
removing it), please let us know and also send us the serial number for proper identification.
Please note that if we do not hear from
you, we will send the most common, current grip profile in order to get the
grips out on time.
What these WILL
NOT FIT:
PLEASE DOUBLE CHECK YOUR FRAME HEIGHT: As mentioned above these grips
will only fit Uberti revolvers having the standard sized SAA style
gripframe (around 3-1/16” to 3-1/8” tall
depending on how you hold your ruler, tape, or caliper).
These WILL NOT fit Uberti gripframes that are around 3-3/8” tall (such
as Taylor & Co.’s Gunfighter or Gunfighter Defender,
Taylor’s Cattleman 44 Mag.,
Cimarron’s Bad Boy, the El Patron Grizzly Paw, the Uberti Callahan,
etc).
Please double check your revolver carefully before ordering. The height difference is easily visible and
obvious if you are familiar with Single Action revolvers. If you have one of these taller frames, our
Uberti 1860 Army “Conversion & Metallic Cartridge” grips will fit these
revolvers. You can locate these in our
store (or please email if you cannot find what you need).
.22 Stallion Revolvers: Please note that these will NOT fit the .22 Caliber Uberti
“Stallion” revolvers, which use a smaller grip.
The Stallion .22 is a 75% scaled-down replica of the full-sized
Cattleman, and therefore takes smaller grips.
If you have a .22 cal. Cattleman however, they are made at 100% full
scale and thus will take the standard grips (so these are the proper grips for
the .22 Cattleman). Please contact us in
advance if you have the smaller .22 Stallion so we can supply the proper grips.
ALL OTHER Non-Uberti revolvers and non-“plowhandle” grip shapes: These WILL NOT FIT any revolvers from other makers (such as Pietta,
Armi San Marco, Colt, Ruger, etc.). Also,
these will NOT fit revolvers using a gripframe that is NOT the standard
“plowhandle” shape, such as the Bisley, the Birdshead, the Thunderer,
Thunderball, or the Lightning style gripframes, nor any of the Remington style
revolvers such as the 1858, 1875, or 1890. These all use an entirely different gripframe
shape. Please take a careful look at the
shape of your gripframe. These are for
the standard “plowhandle” style revolvers only.
[R.Z260408]
A note on
the Italian-produced Revolvers:
The
Italian firms, located in Northern Italy, have been making SAA style revolvers
now for well over a half century, and have made a huge number of makes and
models and grip frame profiles with varying configurations over the years. We have an in-depth knowledge of the
differing grip configurations, have a large library of gripframe variations
from the various makers both old and new, and have vast experience making grips
for Uberti, Pietta, Armi San Marco, and the other Italian gunmaking firms. Our experienced makers go to great lengths
to ensure an exacting fit, including utilizing modern precision CNC production
techniques, as well as incorporating old-time hand tuning and hand checking the
fit of every grip on our reference frames prior to leaving our factory. We have a long list of many satisfied
customers in the shooting industry who have purchased grips to use in a wide
variety of applications, and we can safely and confidently guarantee proper fit
and finish to your complete satisfaction.
For an
additional charge, custom fitting is an option.
Please contact us for further details if you are interested in custom
fitting.
[R.11042600C]
Arizona Custom Grips
About Magna-Tusk™ Ivory
and Stag Grips:
Magna-Tusk™ Ivory and Stag grips, a
product of Arizona Custom Grips, are manufactured out of our
high-grade, high density ivory material designed from the beginning as a premium,
high-strength grip material. Vastly
superior to standard bonded ivory or stag found on most factory and other
aftermarket grips, Magna-Tusk™ is capable of withstanding the heaviest recoil
and impact, and is the toughest alternative grip material available today,
while still retaining the pristine look of real ivory or stag. It is
rock-solid, stable, and water, chemical, and oil resistant. It is
flame and heat resistant, and is entirely void-free, with over 10x the
strength, durability, and impact resistance of alternative materials. Unlike
with real ivory or stag, there is no routine care and maintenance involved,
with no danger of it drying out and cracking if not maintained properly or if
left in the heat. It is filled with premium natural compounds to
produce outstanding aesthetic properties and mechanical
performance. When aged with our natural aging process, it takes on
the equivalent of a 100-year-old patina, with subtle grain details which many
experts cannot tell apart from the real thing. In addition, the material
has a fine grain structure, which holds intricate detail for carvings, artistic
relief work, etc., found on many historic grips.
08292000
The photo used is a stock photo (a sample pair). Yours will appear similar to these. Please note that there may be slight variations to the picture due to camera lighting, monitor settings, etc.
Customer satisfaction is important to us -- full money back, less shipping, if not fully satisfied!
Share
