UBERTI SAA MAGNA-TUSK™ SINGLE ACTION ARMY AGED IVORY GRIPS ~ Cattleman, etc.

Arizona Custom Grips

UBERTI SAA

(1873 SINGLE ACTION ARMY STYLE REVOLVERS)

~ Exclusive ~

  MAGNA-TUSK™

Aged ivory GRIPS

Milled out of a solid block of Magna-Tusk,
denser and heavier than regular Ivory or Stag. 
See below for details.

~~~~~

two-PIECE
(with SCREWHOLE) STYLE grips

THIS LISTING IS FOR OUR
TWO-PIECE (SCREWHOLE) STYLE GRIPS

********

ONE-PIECE VS. TWO-PIECE STYLE GRIPS EXPLAINED:

Note: One-Piece style grips do not have a visible
screw but instead use an internal spacer to mount the grips.  Two-Piece style grips incorporate a visible
screw, allowing easy and quick removal for cleaning or maintenance of your
revolver.  We manufacture both
types.  Both styles of our grips will
interchange and work on either style of grip frame, no matter how your revolver
is currently set up.  Both styles are
traditional and historical designs and both were originally used on early
Colts, so whichever style you choose is really a matter of personal
preference. 

One-Piece
style grips (i.e., grips with no visible screwhole in the grips) incorporate a spacer
(included with the grips) which is user mounted to the inside of the grip
panels to hold them in place instead of a using a screw.  To ensure optimum fit and best performance, the
spacer is sent unmounted since all gripframes vary slightly in inside
dimensions.  Installation is simple and
generally takes only a few minutes. 
Illustrated instructions included with each order.  This results in a rock-tight fit, without the
need of a screw.  One-Piece grips are preferred
by many collectors for their clean lines and traditional look, and are seen on
many early Colts. Once mounted, they are fully removable by removing the three
backstrap screws, and will not alter your revolver in any way.  Reinstallation is in reverse order. 

Alternatively, our Two-Piece style
grips (i.e., grips with a visible screw) offer the superior convenience of
quick grip removal using only the screw (also included with the grips).  Our Two-Piece style grips also include our
proprietary Conversion Kit, allowing
their use on revolvers that do not have a grip pin in the frame (as is the case
with most Italian-made revolvers and others that currently have a one-piece
style grip).  The Conversion Kit replaces
the need for a grip pin and is actually a stronger design, and allows the grips
to lock up tight on the frame, allowing no movement.  This
requires no modification to your revolver. 
Two-piece grips give you the advantage of easier access to your revolver
for cleaning and maintenance, while preserving the integrity of your revolver
in original factory condition. Two-Piece style grips were also used
on many of the early Colts, and are a traditional and iconic historical design,
offering a distinctive look and convenience preferred by many shooters and collectors.

Fully
illustrated, easy-to-follow mounting instructions are included with every order. 

Rev
23122871

~~~~~

WHAT THESE WILL FIT

(Please
read this entire section carefully, including the “WILL NOT FIT” section, in
order to make sure you get the correct grips):

These WILL FIT any of the UBERTI Single Action Army style revolvers, with the standard sized SAA “plowhandle” grip frame, which measures around
3-1/16” to 3-1/8” tall, depending on how you hold your ruler, tape, or caliper.

This includes any of the following (all of which are made by Uberti
and imported by Cimarron, E.M.F., Taylor’s & Co., Stoeger, etc.).  Please email if you cannot find your
particular revolver.

●  Cimarron
Uberti revolvers:  Buntline; Cattleman; Cattleman II; Chisholm; Desperado; El Patron; Evil Roy; Frisco; Holy Smoker; Hombre; Horseman; Cimarron Model P and Model P Jr.; New Sheriff; Old West; Pistoleer; Rooster Shooter; Short Stroke CMS Pro; Short Stroke SASS Pro; Thunderstorm
and Thunderstorm CM; US Military Models (Custer 7^th
Cavalry,  U.S. Cavalry Scout, and U.S.V. Artillery); Wyatt Earp Buntline, and Wyatt
Earp Cody;

●  Taylor’s
& Co. Uberti revolvers:  Cattleman (NOTE: these will NOT fit the Cattleman .44 Mag which uses the larger
3-3/8” gripframe – see below); Cattleman
12-Shot; Devil Anse; Drifter; Gambler; Old Randall; Outlaw Legacy; Ranch Hand; Runnin’ Iron;
Smoke Wagon; Taylor Gambler; and Taylor
Marshall.  (Note: these grips will NOT fit the Taylor’s Gunfighter or Gunfighter
Defender, both of which use the larger 3-3/8” gripframe – see below);

●  Will
also fit Stoeger’s Uberti 1873 SAA revolvers; the E.M.F. Dakota II or Dakota III; the American Arms Regulator;  

●  or
any other Uberti SAA style revolver with
the standard sized (3-1/16” to 3-1/8” tall) plowhandle style grip frame.

Note: If you do
not see your revolver listed, please drop us an email with your model name and
we will verify your revolver.

UBERTI GRIPFRAME
VARIATIONS -- IMPORTANT!

→  PLEASE
NOTE!!  
Over the years Uberti has used multiple variations of gripframes on
their SAA style revolvers, and each uses a slightly different grip.  We carry grips for each of these different
profiles.  In order for us to ensure that
you get the proper grips, please add
a note to your order with the following date-code information:

IF your revolver has a two-digit date code inside
a small rectangular box, or circle, as shown in the second picture in this
listing, OR if your revolver alternatively is marked with Roman numerals (i.e.,
“XXX” or “XXIV”), please attach a note to your order with that
information.  Please note that some of
the newer revolvers have the actual date stamped on the frame (i.e., “2022”),
so if that is the case please send that. 
Also note that these codes or dates are sometimes also stamped on the
side of the mainframe (under the cylinder), or at the base of the barrel.  Please inspect your revolver carefully under
good light for this information.

If after a careful
inspection you find that your revolver does not have the code (which some of
the newer revolvers do not), please send us the first three digits of the
serial number.

Please note that
if we do not hear from you, we will send the most common style grip profile in
order to get the grip out on time.

Note: “PN” and
“CIP” are Italian proof marks and are NOT the correct date codes.

What these WILL NOT FIT: 

Please double check frame size:  These grips will only fit Uberti revolvers
having the standard sized SAA style gripframe (around 3-1/16” to 3-1/8” tall depending on how
you hold your ruler, tape, or caliper). 
These WILL NOT fit Uberti gripframes that
are around 3-3/8” tall (such as Taylor & Co.’s Gunfighter or Gunfighter Defender, Taylor’s Cattleman 44 Mag., Cimarron’s Bad
Boy, the El Patron Grizzly Paw,
the Uberti Callahan, etc). 
Please check your revolver
carefully before ordering.  If
you have one of these taller frames, our Uberti 1860 Army “Conversion &
Metallic Cartridge” grips will fit these revolvers.  You can locate these in our store. 

.22 Stallion Revolvers:  Please note that these will NOT fit the .22 Caliber Uberti
“Stallion” revolvers, which use a smaller grip. 
Please contact us if you have a .22 Stallion so we can supply the proper
grips.

Non-Uberti makers and other grip shapes:  These WILL NOT FIT any revolvers from other makers (such as
Pietta, Armi San Marco, Colt, Ruger, etc.). 
Also, these will NOT fit revolvers using a gripframe that is not
the standard “plowhandle” shape, such as the Bisley, the Birdshead, the
Thunderer, Thunderball, or the Lightning style gripframes, nor any of the
Remington style revolvers such as the 1858, 1875, or 1890.  These use an entirely
different gripshape.  Please take a
careful look at the shape of your gripframe. 
These are for the standard “plowhandle” style revolvers only.

Rev. 23120905

A note on
the Italian-produced Revolvers:

The
Italian firms, located in Northern Italy, have been making SAA style revolvers
now for well over a half century, and have made a huge number of makes and
models and grip frame profiles with varying configurations over the years.  We have an in-depth knowledge of the
differing grip configurations, have a large library of gripframe variations
from the various makers both old and new, and have vast experience making grips
for Uberti, Pietta, Armi San Marco, and the other Italian gunmaking firms.   Our experienced makers go to great lengths
to ensure an exacting fit, including utilizing modern precision CNC production
techniques, as well as incorporating old-time hand tuning and hand checking the
fit of every grip on our reference frames prior to leaving our factory.  We have a long list of many satisfied
customers in the shooting industry who have purchased grips to use in a wide
variety of applications, and we can safely and confidently guarantee proper fit
and finish to your complete satisfaction.

For an
additional charge, custom fitting is an option. 
Please contact us for further details if you are interested in custom
fitting.

Rev. 07132300

Arizona Custom Grips

About our exclusive Magna-Tusk™ “Hi-Grade”
Ivory and Stag Grips:

Magna-Tusk™ Ivory and Stag grips, an
exclusive of Arizona Custom Grips, are manufactured out of our
super high-grade, ultra-high density material developed exclusively for our
premium grip production.  Vastly superior to standard bonded ivory or
stag found on factory and other aftermarket grips, Magna-Tusk™ is capable of
withstanding the heaviest recoil and impact, and is the toughest alternative grip
material available today, while still retaining the pristine look of real ivory
or stag.  It is completely rock-solid, stable, and water, chemical,
and oil resistant.  It is flame and heat resistant, and is entirely
void-free, with over 10x the strength, durability, and impact resistance of
alternative materials.  Unlike with real ivory or stag, there is no
routine care and maintenance involved, with no danger of it drying out and
cracking if not maintained properly or if left in the heat.  It is
filled with premium natural and synthetic compounds to produce outstanding
aesthetic properties and mechanical performance.  When aged with our
exclusive aging process, it takes on the equivalent of a 100-year-old patina,
with subtle grain details which many experts cannot tell apart from the real
thing.  In addition, the material has a fine grain structure, which
holds intricate detail for carvings, artistic relief work, etc., found on many
historic grips. 

About Our Aging Process:

Unlike
the lightweight artificial yellow plastic materials sometimes offered for sale,
Magna-Tusk aged grips start out as a solid block of white virgin Magna-Tusk
Ivory.  Grip blanks are then milled from
this premium material, incorporating both CNC techniques for blanking and
finishing techniques similar to those used in manufacturing the originals.  They are then carefully aged with our
exclusive aging process, incorporating concentrated UV light (the essential
aging property in natural sunlight). 

Our process produces an authentic appearance and genuine patina
which extends into the surface, just like real ivory or stag.  Not only does this
give it the appearance of authenticity and depth, but this surface will not
chip, crack, or peel like a superficially applied coating.  Accept no substitutes.  With Magna-Tusk aged grips, most experts cannot tell them apart
from a decades-old or even a centuries-old original.  While the quality difference is somewhat
noticeable in the photos, the difference is even more apparent when seen and
handled in person.  Many of our repeat
sales are made by the very customers we sell to, who take their custom-stocked
revolvers to the range or club, where the quality difference is immediately
seen and appreciated by fellow shooters.

Magna-Tusk grips have all the authenticity of the originals, with
several improvements over original materials including increased durability,
and are made to last a lifetime.  They
feature subtle but authentic color mottling, grain variegation, and other
authentic minute details found on original old Ivory and aged Stag, as seen on
many of the revolvers which belonged to gunfighters and lawmen of the Old
West.  Dense, heavy, and solid, Magna-Tusk grips are in a class all their
own. With our exclusive aging process, these grips
are outstanding right out of the box, and will continue to improve over
time.  The more these grips are handled
and used, the better they look!

030120

Grip screw included
with all grips. 

The photo used is a stock photo (a sample
pair).  Yours will appear similar to these. 

Customer
satisfaction is important to us – Full money back, less shipping, if not completely satisfied!!